FX SOFTAIL PASSENGER GRAB RAIL KIT
J046912008-05-06
GENERAL
Kit Number
97036-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
INSTALLATION
| 1. | Remove the seat using the owner's manual instructions. | |
| 2. | See Figure 1 and Table 1. Remove adhesive cover and attach the spacer foam (6) to the underside of the grab rail (1) along the outside edges. | |
| 3. | Line up the holes in the protective tape (7) with the mounting holes in the fender and attach the tape to the fender. | |
| 4. | Attach the seat retention nut (9) with the retention washer (10). | |
| 5. | Position the grab rail over the mounting holes and use washer (2) and button head cap screw (3) and attach to the seat retention nut. | |
| 6. | From the underside of the fender, place a button head cap screw (8) and washer (5) through the fender and grab rail and attach with a washer (5) and lock nut (4). | |
| 7. | Tighten fasteners in Steps 5 and 6 to 6.8–10.8 N·m (5–8 ft-lbs). | |
| WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
| 8. | Install the seat. |
SERVICE PARTS
Figure 1. Service Parts: Passenger Grab Rail
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Grab rail | Not Sold Separately |
2 | Washer | 6703 |
3 | Hex socket head cap screw | 94386-92T |
4 | Lock nut | 7739 |
5 | Washer (2) | 6330 |
6 | Spacer foam (2) | 97041-09 |
7 | Protective tape | 59501-09 |
8 | Hex socket head cap screw | 94393-92T |
9 | Seat retention nut | Not Sold Separately |
10 | Retention washer | Not Sold Separately |
The seat retention nut and the retention washer, items 9 and 10, can be purchased as kit 59768-97. | ||