Brake Pedal Pad Kit (Small)
J039392011-04-29
GENERAL
Kit Number
42650-08, 50600037
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
| 1. | Remove the previously installed brake pedal cover from the foot brake lever. | |
| 2. | See Figure 1. Obtain the new chrome pedal pad cover (1), pad tread (2), screw (4) and washer (3) from the kit. Insert the pad tread into the pedal pad cover and align the assembly over the foot brake lever (A). | |
| 3. | Insert the screw with washer through the hole in the brake lever through the pad tread, then thread into the chrome pad cover. | |
 WARNINGAfter repairing the brake system, test brakes at low speed. If brakes are not operating properly, testing at high speeds can cause loss of control, which could result in death or serious injury. (00289a) | ||
| 4. | Tighten the hex socket head screw to 8–10 N·m (69–84 in-lbs). |
SERVICE PARTS
Figure 1. Service Parts: Brake Pedal Pad Kit (Stealth Kit Shown)
Table 1. Service Parts: Brake Pedal Pad Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Pad cover, chrome | Not Sold Separately |
2 | Tread, pad | Not Sold Separately |
3 | Washer, #10 (Kit No. 42650-08) | 6703 |
Washer, plain (Kit No. 50600037) | 6716 | |
4 | Screw, button head (Kit No. 42650-08) | 3063 |
Screw, button head (Kit No. 50600037) | 3026 | |
Items mentioned in text, but not included in kit. | ||
A | Foot brake lever | |