1 | Closed brake disc |
2 | Open brake disc or floating rotor |
Brake Disc | Hardware |
---|---|
Closed disc | 5 Stock disc screws (3655A) |
Chrome screw kit (46646-05) includes 5 screws | |
Open disc | 5 Stock disc screws (3762M) and 5 disc washers (6966M) |
NOTE: Models equipped with dual front brakes and models being equipped with a wheel with dual brake mounting surfaces require twice as many screws/washers (10 total screws or 2 chrome screw kits if available). |
1. | Remove existing front wheel assembly. Save axle, axle nut, brake disc and wheel spacers for kit installation. Refer to FRONT WHEEL in service manual. For Kit 44689-08: Discard brake disc when replacing a laced wheel. For Kit 44612-07: Discard stock brake discs. For FLSTC and FLSTN Models: Discard moon-style hub cap. For FXSTD Models: Discard right side tapered spacer. NOTE
| |
2. | See Figure 2. Install valve stem assembly (L, M or N) on wheel. Refer to TIRES in service manual. NOTE Install the primary bearing first using appropriate service manual and WHEEL BEARING REMOVER/INSTALLER. For Kits 44632-07, 44633-08, 41406-07 and 41406-08:
For Kits 44659-07 and 44666-07:
For Kit 44634-07:
For Kit 44689-08:
For Kit 44612-07:
| |
NOTICE Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c) | ||
3. | Assemble the wheel installation kit components and brake disc(s) to wheel, using the appropriate service parts table. Refer to FRONT WHEEL in service manual. | |
4. | For FLSTC and FLSTN Models: Install wheel kit and right side wheel spacer provided in installation kit. Refer to FRONT WHEEL in service manual. For FXSTD Models: Install wheel kit, stock left side wheel spacer and the right side spacer provided in the installation kit to replace the tapered spacer discarded in Step 1. Refer to FRONT WHEEL in service manual. For FXSTS Models: Install the spacer provided in the installation kit between the stock left side spacer and the fork. For all other models: Install previously removed wheel spacers. Refer to FRONT WHEEL in service manual. | |
5. | Install front wheel (1), stock axle and stock axle nut. Refer to FRONT WHEEL in service manual. |
Kit | Item | Description (Quantity) | Part Number |
---|---|---|---|
44633-08, 44612-07, 41406-07, 41406-08, 44689-08 | 1 | Wheel | Not Sold Separately |
44632-07 | 1 | Wheel | Not Sold Separately |
2 | Hub cap | 44920-05 | |
44659-07, 44666-07, 44634-07 | 1 | Wheel | Not Sold Separately |
2 | Hub cap | 44921-05 | |
Visual indicator mentioned in text: | |||
3 | Machined groove (all wheels) |
FRONT 3/4 Inch Bearing Wheel Installation Kit (43833-07A) | ITEM (Quantity Used and Description) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | C | D | E | G | H | I | L | M |
2000-2006 FLST and FLSTF (except 2006 FLSTFSE2) | 16 x 3.0 in | 2 | 0 | 1 | 0 | 0 | 0 | 0 | * | * |
2000-2006 FLSTC and FLSTN | 16 x 3.0 in | 2 | 0 | 1 | 0 | 0 | 0 | 1 | * | * |
2006 FLSTFSEi | 17 x 3.5 in | 2 | 0 | 1 | 0 | 0 | 0 | 1 | * | * |
2008-later FLSTSB | 18 x 3.5 in | 2 | 0 | *** | 0 | *** | 0 | 0 | * | * |
2000-2007 XL; 2000-2003 Dyna (except FXDWG) | 19 x 2.5 in | 2 | 0 | 0 | 1 | 0 | 0 | 0 | * | * |
2000-2007 XL; 2000-2003 Dyna (except FXDWG) | 21 x 2.15 in | 2 | 0 | 0 | 1 | 0 | 0 | 0 | * | * |
2000-2006 FXST/B/C; 2000-2005 FXDWG** | 21 x 2.15 in | 2 | 1 | 0 | 0 | 0 | 0 | 0 | * | * |
2000-2006 FXSTS** | 21 x 2.15 in | 2 | 1 | 0 | 0 | 0 | 1 | 0 | * | * |
2000-2006 FXSTD (Except FXSTDSE)** | 21 x 2.15 in | 2 | 1 | 0 | 0 | 1 | 0 | 0 | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** The right side of the wheel is the primary bearing side for this fitment. *** See INSTALLATION section for separate hardware kit to be used for FLSTSB models. | A | Bearing, regular (2) | 9267 | |||||||
C | Axle sleeve | 43536-00 | ||||||||
D | Axle sleeve | 43608-00 | ||||||||
E | Axle sleeve | 43613-00 | ||||||||
G | Spacer, axle | 40910-00A | ||||||||
H | Spacer, axle | 43313-98 | ||||||||
I | Spacer, wheel | 43617-00A | ||||||||
L | Valve stem, short | 43157-83A | ||||||||
M | Valve stem, long | 43206-01 |
FRONT 1 Inch Bearing Wheel Installation Kit (43848-08A) | ITEM (Quantity Used and Description) | |||||||
---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | C | D | E | F | L | M |
2000-2007 Touring | 16 x 3.0 in | 2 | 1 | 0 | 0 | 0 | * | * |
2004-2007 Touring | 18 x 3.5 in | 2 | 1 | 0 | 0 | 0 | * | * |
2004-2005 Dyna (except FXDWG) | 19 x 2.5 in | 2 | 0 | 0 | 0 | 1 | * | * |
2006-2007 Dyna (except FXDWG) | 19 x 2.5 in | 2 | 0 | 0 | 1 | 0 | * | * |
2002-2007 VRSC | 19 x 3.0 in | 2 | 0 | 0 | 1 | 0 | * | * |
2006-2007 FXDWG** | 21 x 2.15 in | 2 | 0 | 1 | 0 | 0 | * | * |
2004-2005 Dyna (except FXDWG) | 21 x 2.15 in | 2 | 0 | 0 | 0 | 1 | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** The right side of the wheel is the primary bearing side for this fitment. | A | Bearing, regular (2) | 9247 | |||||
C | Axle sleeve | 43517-00 | ||||||
D | Axle sleeve | 43633-06 | ||||||
E | Axle sleeve | 43641-01 | ||||||
F | Axle sleeve | 43755-04 | ||||||
L | Valve stem, short | 43157-83A | ||||||
M | Valve stem, long | 43206-01 |
FRONT 25 mm Bearing Wheel Installation Kit (41452-08C) | ITEM (Quantity Used and Description) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | C | D | E | J | K | L | M | N |
2010 and later XL1200X; 2011 and later XL1200C | 16 x 3.0 in | 2 | 0 | 0 | 1 | 0 | 0 | * | * | * |
2008 and later FXCW and FXCWC (non-ABS) | 19 x 2.5 in | 2 | 1 | 0 | 0 | 1 | 0 | * | * | * |
2008 and later FXCW and FXCWC (non-ABS) | 19 x 2.15 in | 2 | 1 | 0 | 0 | 0 | 0 | * | * | * |
2008 and later XL (except XL1200X and 2011 and later XL883L) | 19 x 2.5 in | 2 | 0 | 1 | 0 | 0 | 1 | * | * | * |
2008 and later XL (except XL1200X and 2011 and later XL883L) | 21 x 2.15 in | 2 | 0 | 1 | 0 | 0 | 1 | * | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** Bearing shim installed under the primary bearing. | A | Bearing, regular (2) | 9276 | |||||||
C | Axle sleeve | 41548-08 | ||||||||
D | Axle sleeve | 43906-08 | ||||||||
E | Axle sleeve | 11888 | ||||||||
J | Bearing shim** | 41448-08 | ||||||||
K | Bearing shim** | 43315-07 | ||||||||
L | Valve stem, short | 43157-83A | ||||||||
M | Valve stem, long | 43206-01 | ||||||||
N | Valve stem, pull thru | 40999-87 |
FRONT 25 mm Bearing Wheel Installation Kit (41455-08C) | ITEM (Quantity Used and Description) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | C | D | J | K | L | M | N |
2008 Touring; 2009 and later FLHRC (non-ABS) and Trike (non-ABS) | 16 x 3.0 in | 2 | 0 | 1 | 0 | 1 | * | * | * |
2009 and later Touring (non-ABS) | 17 x 3.0 in | 2 | 0 | 1 | 0 | 0 | * | * | * |
2008 and later Touring (non-ABS) | 18 x 3.5 in | 2 | 0 | 1 | 0 | ** | * | * | * |
2008 and later Dyna (except FLD, FXDWG and FXDF) | 19 x 2.5 in | 2 | 1 | 0 | ** | 0 | * | * | 0 |
2008 and later VRSCAW, VRSCD, VRSCF and VRSCDX (non-ABS) | 19 x 3.0 in | 2 | 1 | 0 | ** | 0 | * | * | 0 |
2009 and later Touring (non-ABS) | 19 x 3.5 in | 2 | 0 | 1 | 0 | 0 | * | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** See NOTES for your wheel kit above the wheel assembly step in INSTALLATION to determine if bearing shim is used for your particular wheel kit and fitment. *** Bearing shim installed under the primary bearing. | A | Bearing, regular (2) | 9276 | ||||||
C | Axle sleeve | 41748-08 | |||||||
D | Axle sleeve | 41900-08 | |||||||
J | Bearing shim*** | 41450-08 | |||||||
K | Bearing shim*** | 43903-08 | |||||||
L | Valve stem, short | 43157-83A | |||||||
M | Valve stem, long | 43206-01 | |||||||
N | Valve stem, pull thru | 40999-87 |
FRONT 25 mm Bearing Wheel Installation Kit (43851-11A) | ITEM (Quantity Used and Description) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | C | G | H | J | L | M | N |
2007 and later FLSTC, FLSTN and FLS (non-ABS) | 16 x 3.0 in | 2 | 1 | 0 | 1 | 1 | * | * | * |
2008 and later FXDF | 16 x 3.0 in | 2 | 1 | 0 | 0 | 0 | * | * | * |
2007 and later FLSTF and FLSTFB (non-ABS) | 17 x 3.5 in | 2 | 1 | 0 | 0 | 0 | * | * | * |
2008 and later FLSTF and FLSTFB (non-ABS) | 18 x 3.5 in | 2 | 1 | 0 | 0 | 0 | * | * | * |
2008 and later FXDF; 2012 and later FLD | 18 x 3.5 in | 2 | 1 | 0 | 0 | 0 | * | * | * |
2007 and later FXS, FXST/B/C (non-ABS); 2008 and later FXDWG*** | 21 x 2.15 in | 2 | 1 | 0 | 0 | 1 | * | * | * |
2007 FXSTD*** | 21 x 2.15 in | 2 | 1 | 1 | 0 | 1 | * | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** Bearing shim installed under the primary bearing. *** The left side of the wheel is the primary bearing side for this fitment. | A | Bearing, regular (2) | 9276 | ||||||
C | Axle sleeve | 41349-07 | |||||||
G | Spacer, axle | 41504-07 | |||||||
H | Spacer, axle | 41695-07 | |||||||
J | Bearing shim** | 43315-07 | |||||||
L | Valve stem, short | 43157-83A | |||||||
M | Valve stem, long | 43206-01 | |||||||
N | Valve stem, pull-thru | 40999-87 |
FRONT 25 mm Bearing ABS Wheel Installation Kit (41454-08B) | ITEM (Quantity Used and Description) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | B | C | D | J | K | L | M | N |
2008 Touring and 2009 and later FLHRC with ABS | 16 x 3.0 in | 1 | 1 | 0 | 1 | 0 | 1 | * | * | 0 |
2009 and later Touring with ABS | 17 x 3.0 in | 1 | 1 | 0 | 1 | 0 | 0 | * | * | * |
2008 and later Touring with ABS | 18 x 3.5 in | 1 | 1 | 0 | 1 | ** | ** | * | * | * |
2012 and later Dyna with ABS (Except FLD, FXDWG and FXDF) | 19 x 2.5 in | 1 | 1 | 1 | 0 | ** | ** | * | * | 0 |
2008 and later VRSCAW, VRSCD, VRSCF and VRSCDX with ABS | 19 x 3.0 in | 1 | 1 | 1 | 0 | ** | ** | * | * | 0 |
2009 and later Touring with ABS | 19 x 3.5 in | 1 | 1 | 0 | 1 | 0 | 0 | * | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** See NOTES for your wheel kit above the wheel assembly step in INSTALLATION to determine which bearing shim to use for your particular wheel kit and fitment. *** Red side of bearing must be installed toward the wheel. The ABS bearing is primary. **** Bearing shim installed under the primary bearing. | A | Bearing, regular | 9276 | |||||||
B | Bearing, ABS*** | 9252 | ||||||||
C | Axle sleeve | 41748-08 | ||||||||
D | Axle sleeve | 41900-08 | ||||||||
J | Bearing shim**** | 41450-08 | ||||||||
K | Bearing shim**** | 43903-08 | ||||||||
L | Valve stem, short | 43157-83A | ||||||||
M | Valve stem, long | 43206-01 | ||||||||
N | Valve stem, pull thru | 40999-87 |
FRONT 25 mm Bearing ABS Wheel Installation Kit (43093-11A) | ITEM (Quantity Used and Description) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Fitment | Wheel Size | A | B | C | D | G | J | K | L | M | N |
2011 and later FLSTC, FLSTN and FLS with ABS | 16 x 3.0 in | 1 | 1 | 1 | 0 | 1 | 0 | 1 | * | * | * |
2012 and later FXDF with ABS | 16 x 3.0 in | 1 | 1 | 1 | 0 | 0 | 0 | 0 | * | * | * |
2011 and later FLSTF and FLSTFB with ABS | 17 x 3.5 in | 1 | 1 | 1 | 0 | 0 | 0 | 0 | * | * | * |
2011 and later FLSTF and FLSTFB with ABS | 18 x 3.5 in | 1 | 1 | 1 | 0 | 0 | 0 | 0 | * | * | * |
2012 and later FXDF and FLD with ABS | 18 x 3.5 in | 1 | 1 | 1 | 0 | 0 | 0 | 0 | * | * | * |
2011 and later FXCWC with ABS | 19 x 2.15 in | 1 | 1 | 0 | 1 | 0 | 0 | 0 | * | * | * |
2011 and later FXCWC with ABS | 19 x 2.5 in | 1 | 1 | 0 | 1 | 0 | 1 | 0 | * | * | * |
2011 and later FXS, FXST and 2012 and later FXDWG with ABS | 21 x 2.15 in | 1 | 1 | 1 | 0 | 0 | 0 | 1 | * | * | * |
Installation kits are designed to work with many different wheel styles and fitments. Contact a Harley-Davidson dealer to verify that the wheel and installation kits are both designed and approved for the motorcycle they are being installed on. NOTES: * See NOTE above valve installation step in INSTALLATION to determine which valve stem to use for your particular kit. Discard other valve stem(s). ** Red side of bearing must be installed toward the wheel. The ABS bearing is the primary bearing. *** Bearing shim installed under the primary bearing. | A | Bearing, regular | 9276 | ||||||||
B | Bearing, ABS** | 9252 | |||||||||
C | Axle sleeve | 41349-07 | |||||||||
D | Axle sleeve | 41548-08 | |||||||||
G | Spacer | 41695-07 | |||||||||
J | Bearing shim*** | 41448-08 | |||||||||
K | Bearing shim*** | 43315-07 | |||||||||
L | Valve stem, short | 43157-83A | |||||||||
M | Valve stem, long | 43206-01 | |||||||||
N | Valve stem, pull-thru | 40999-87 |