PUSHROD COVER RETAINER INSTALLATION AND REMOVAL TOOL

J048642009-01-06

GENERAL

Kit Number

94086-09

Models

For all Big Twin and Sportster model engines using pushrod covers with clip-in retainers.

Kit Contents

Figure 1. Pushrod Cover Retainer Installation and Removal Tool

There are no Service Parts available with this kit.

REMOVAL

See Figure 2. Insert the pin of the pushrod cover retainer tool into the retainer loop with the back of the tool towards the cylinder fins. Rotate the tool towards the cylinder to remove the pushrod cover retainer.

INSTALLATION

1.	See Figure 3. Load the pushrod cover retainer into the tool as shown in figure 3. Place the top edge of pushrod cover against top edge of push rod.
2.	See Figure 4. Place the tool on top of the spring cover. Pivot the tool upward to install the pushrod cover retainer	Figure 2. Removing Pushrod Cover Retainer Figure 3. Loading Pushrod Cover Retainer in Tool Figure 4. Pushrod Cover Retainer Installation