DOCKING HARDWARE COVER KIT

J044442009-03-16

GENERAL

Kit Numbers

48035-09, 48171-09, 48218-10, 48220-10, 48221-10, 48223-10, 48225-10

Models

For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).

Kit Contents

Table 1. Kit Contents

Description	Part Number
Docking point cover (2)	Not sold separately

There are no service parts available for this kit.

INSTALLATION

Remove any accessories installed on docking points.

NOTE

The docking point covers are retained by magnets installed in the ends of the covers.

Care should be taken when placing the cover on the docking point. Releasing the cover from too great a distance may damage the cover's magnet.

See Figure 1. Install one docking point cover on each rear docking point.

When installing accessories to docking points, pull on docking point covers to remove.

Figure 1. Docking Point Cover Kit