1. | See Figure 1. Lift the seat/lid (2) straight up to remove it from the bucket (1). NOTE The dirt guard at the bottom of the bucket can be removed when cleaning the bucket. | |||||
2. | See Figure 2. Spread open the apron designed to hold the detailing accessories. |
Figure 1. Bucket/Lid Figure 2. Apron | ||||
3. | See Figure 3. To allow for full movement of the bucket handle, thread the apron halfway through the separation (1) formed by the two sets of mesh pockets. The separation should be positioned directly over the top of the pivot hole (2) of the bucket handle. | |||||
4. | See Figure 4. Wrap the apron around the bucket so the belt (1) rests between the top ridge and the ridge that is second from top. Insert the plastic tang (2) into the plastic buckle (3) firmly pushing the two parts together until they lock. Firmly hold the apron to the bucket (to prevent rotation) and pull the belt until the apron is tightly attached to the bucket. |
1 | Separation |
2 | Pivot hole |
1 | Belt |
2 | Tang |
3 | Buckle |