PRIMARY COVER CHROME HARDWARE KIT
J040672006-12-12
GENERAL
Kit Number
94052-07
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
INSTALLATION
WARNINGDisconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00049a)
| 1. | Disconnect the negative (-) battery cable from the battery. Disconnect the positive (+) battery cable from the battery. | |
| 2. | Replace existing zinc hardware with chrome plated hardware one at a time so the primary chaincase and clutch cover gasket do not need to be replaced. | |
| 3. | Consult the Service Manual for screw locations and torque values. | |
| WARNING Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a) | ||
| 4. | Connect the positive (+) battery cable to the battery. Connect the negative (-) battery cable to the battery. |
SERVICE PARTS
Figure 1. Service Parts: Primary Cover Chrome Hardware Kit
Table 1. Service Parts: Primary Cover Chrome Hardware Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw, Chrome socket head hex cap, 1/4-20 x 1 3/8 in. | 3125 |
2 | Screw, Chrome socket head hex cap, 1/4-20 x 4 3/4 in. | 1749 |
3 | Screw, Chrome button head TORX, 1/4-20 x 11/16 in. | 94292-04 |
4 | Washer,Chrome flat, .43 OD x .27 ID x .06 THK in. | 946062-03 |