FXCW/FXCWC REAR TURN SIGNALS
J049762010-03-05
GENERAL
Kit Number
60153-08A, 60244-08A
Models
This kit fits 2008-2010 FXCW/FXCWC model motorcycles.
Additional Parts Required
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
The turn signals in this kit are slightly different from the stock turn signal. When replacing a rear turn signal for the first time, replace both rear turn signals. If future rear turn signal replacement is necessary, it will only be necessary to replace a single turn signal.
This kit installs in the same manner as the original equipment (OE) rear turn signal. See the service manual to remove and install the existing rear turn signals.
SERVICE PARTS
Figure 1. Service Parts: FXCW/FXCWC Rear Turn Signals
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Turn signal (kit number 60244-08A) (2)
73386-11
Turn signal (kit number 60153-08A) (2)
73387-11
2
  • TERMINAL,PIN, #16-20 AWG
72169-07