PRIMARY FILL FUNNEL - EVOLUTION & EARLY TWIN CAM MODELS

J052972010-11-05

GENERAL

Kit Number

62700015

Models

For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).

Kit Contents

This kit contains one primary fill funnel.

There are no service parts available with this kit.

SETUP

For EVOLUTION engine models: See Figure 1. Modify the primary fill funnel by cutting along the cut out lines (1) which are visible on the back of the funnel.

For EARLY TWIN CAM engine models: No modifications are needed.

OPERATION

Remove the derby cover.
See Figure 2. Insert the primary fill funnel into the opening in the primary housing cover. Allow the side tabs to rest outside the opening and the lower tabs inside the opening. See Figure 3. For EVOLUTION models allow one side tab to rest outside the opening and one side tab as well as the lower tabs to rest inside the opening.

1	Cut out lines

Figure 1. EVO Model Cut Out

Figure 2. Primary Fill Funnel - Early Twin Cam Engine Models

Figure 3. Primary Fill Funnel - Evolution Engine Models