FOOTBOARD HEEL GUARD
J055002012-01-12
GENERAL
Kit Number
50500225
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
- Remove the rubber insert from right footboard. Save for later installation.
- Remove right side OE footboard.
- See Figure 1. Fit heel guard to foot board use the screw (7) and tab (8) to align the footboard as pictured.
- Use the fastener tab (5) as a template to mark the drill hole location. Remove footboard and drill a 0.281 (9/32) diameter hole in footboard base.
- Install Heel Guard to footboard using supplied hardware.
- The rear tab should rest against the rear footboard support and fastened to the support using hardware previously removed.
- Install rubber footboard pad.
| 1 | Heel guard |
| 2 | Screw |
| 3 | Washer |
| 4 | Nut |
| 5 | Fastener tab |
| 6 | Nut |
| 7 | Screw |
| 8 | Fastener tab |
Figure 1. Installing Heel Guard to Foot Rest
SERVICE PARTS
Figure 2. Service Parts: Footboard Heel Guard
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Heel Guard | Not sold separately |
2 | Hex socket button head screw | 924 |
3 | Plain washer, type 3 | 6703 |
4 | Lock nut, nylon insert | 7686 |