ROAD KING NACELLE REPLACEMENT KIT
J059952014-04-01
GENERAL
Kit Number
67700250
Models
This nacelle kit is for use on 2014 and later Road King® models. It is intended to be used as a complete kit.
Kit Contents
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
INSTALLATION
- These components replace the original equipment components. Follow service manual procedures to install this kit. Retain all fasteners for installation of new components.
SERVICE PARTS
Figure 1. Nacelle Kit
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Handlebar clamp cover | 55800385 |
2 | Trim strip | 61400282 |
3 | Flange nut | 7888A |
4 | Housing, left | 61300097 |
5 | Housing, right | 61300098 |
6 | Label, FRT/FOG lamp, HDI | 15346-98A |
7 | Label, ON/OFF (2) | 14019-83A |