0/0
Vintage White Footboard Pad
J061412014-11-18
GENERAL
Kit Number
50500411
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1. There are no service parts available with this kit.
INSTALLATION
  1. With left side operator footboard in up position, use a screwdriver to work rubber footboard pad assembly collars out through the top of the footboard.
  2. Moisten kit footboard pad assembly rubber collars with dishwashing soap to ease installation.
  3. With footboard in up position, firmly hold new footboard pad assembly in installation position. From underside of footboard use a pliers to pull each rubber isolator into its footboard base hole until the thick collar emerges.
  4. Repeat procedures for right side footboard pad assembly.
NOTE
Avoid the contact of chrome surfaces with abrasive materials (stones, sand, etc.) as damage will result.
Figure 1. Vintage White Footboard Pad
In Use
If your white footboards become discolored, the use of a clean white cloth and common dish soap or Harley-Davidson Wheel and Tire Cleaner (Part No. 93600024) to clean the footboards will aid in removing any discoloration or stains. Rinse with clean water and dry thoroughly.