WINDSHIELD TRIM
J060642015-04-21
GENERAL
Kit Number
57400299, 57400320
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | See Figure 1. Begin on one side. Remove two original equipment (OE) screws and washers. Discard. | |
| 2. | Install windshield trim (2 or 3) and screws (1). Leave fasteners loose. | |
| 3. | Repeat previous steps on the other side. NOTE Do not over-tighten screws. | |
| 4. | Tighten screws to 0.9–1.3 N·m (8–12 in-lbs). |
SERVICE PARTS
Figure 1. Windshield Trim
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw, silver (4) | 2495 |
Screw, black (4) | 10200400 | |
2 | Windshield trim, left side, chrome | 57400269 |
Windshield trim, left side, black | 57400309 | |
3 | Windshield trim, right side, chrome | 57400268 |
Windshield trim, right side, black | 57400308 |