VINTAGE WHITE SHIFTER PEG
J059742014-11-18
GENERAL
Kit Number
33600071
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
A service manual for your model motorcycle is available from a Harley-Davidson dealer.
INSTALLATION
| 1. | Remove previously installed shifter peg from motorcycle. Discard peg and screw. | |
| 2. | See Figure 1. Insert peg stud (1) into shifter peg rubber (2). Install to shift pedal. | |
| 3. | Tighten screw to 15–20 N·m (11–15 ft-lbs). |
In Use
If your white footpegs become discolored, the use of a clean white cloth and common dish soap or Harley-Davidson Wheel and Tire Cleaner (Part No. 93600024) to clean the footpegs will aid in removing any discoloration or stains. Rinse with clean water and dry thoroughly.
SERVICE PARTS
Figure 1. Service Parts: Vintage White Shifter Peg
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Stud Peg | Not Sold Separately |
2 | Shifter Peg Rubber | Not Sold Separately |