0/0
CLUTCH MASTER CYLINDER REBUILD KIT
J059882014-09-12
GENERAL
Kit Number
37200096A
Models
For model fitment information, See the Parts Catalog.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation. One is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 2 and Table 1.
Installation Requirements
Proper installation of this kit requires new, clean hydraulic brake fluid. See the owner's manual for the specified brake fluid.
KIT INSTALLATION
NOTE
Kit contains different sealing washers depending on model. See Figure 1 , to identify sealing washer needed for installation.
  1. See the service manual and follow the instructions given to remove clutch master cylinder and reservoir.
  2. Compare removed sealing washers with washers from kit.
  3. Set aside new sealing washers needed for installation.
  4. Discard remaining washers.
  5. See the service manual and follow the instructions given to disassemble, assemble and install clutch master cylinder and reservoir.
1Copper sealing washer (Part No. 41751-06A)
2Sealing washer (Part No. 41756-08)
30.600 Inch (15.2 mm)
4Sealing washer (Part No. 41731-01)
50.665 inch (16.9 mm)
6Sealing washer (Part No. 41733-88)
70.760 inch (19.3 mm)
Figure 1. Sealing Washers
SERVICE PARTS
Figure 2. Service Parts: Clutch Master Cylinder Rebuild Kit
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Piston assembly (includes items 2 through 7
Not Sold Separately
2
  • Spring
Not Sold Separately
3
  • Primary cup
Not Sold Separately
4
  • Retaining ring
Not Sold Separately
5
  • Piston
Not Sold Separately
6
  • Secondary cup
Not Sold Separately
7
  • Boot
Not Sold Separately
8
Lubricant
Not Sold Separately
9
Retaining ring
11143
10
Sealing Washer, copper (2)
41751-06A
11
Sealing Washer, steel/rubber (2)
41731-01
12
Sealing Washer, steel/rubber (2)
41756-08
13
Sealing Washer, steel/rubber (2)
41733-88