7-INCH HEADLAMP TRIM RING
J061812017-08-23
GENERAL
Kit Number
61400319, 61400347, 61400348, 61400349
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no service parts available for this kit.
INSTALLATION
| 1. | Remove original equipment (OE) trim ring and mounting screw. | |
| 2. | See Figure 1. Slip new trim ring (2) over OE headlamp housing. | |
| 3. | Align the back mounting tab to the 11 o'clock position. Rotate the ring to the 12 o'clock position. Verify that the tab has engaged the headlamp mount ring. | |
| 4. | Position mounting screw (1) to lower mounting tab. Reuse OE screw. | |
| 5. | Tighten mounting screw to: Torque: 1–1.5 N·m (9–13 in-lbs) Accessory Trim Ring Screw |
| 1 | OE mounting screw |
| 2 | Trim ring |
Figure 1. Trim Ring