Air Cleaner Trim
Kit Numbers
61300891, 61300892, 61300788, 61300787
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of (English only).
  1. Carefully remove and discard existing adhesive insert by working around the perimeter of the cover and gently prying up top lip.
  2. Carefully remove old adhesive with mineral spirits.
  3. Clean the mounting surface with denatured alcohol and clean paper towels. Do not use a rag or cloth towel.
  4. NOTE
    Ideal application temperature range is 21–37 °C (70–100 °F).
  5. Position new insert in desired location on cover and mark location with grease pen.
  6. See Figure 1. Remove the adhesive backing. Using alignment marks, press insert firmly into place to activate adhesive.
Figure 1. Decorative Insert