TOUR-PAK KIT
J063832017-08-23
GENERAL
Kit Number
53000570, 53000598, 53000599
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
Kits require separate purchase of a Detachable Tour-Pak Rack. See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only) for the proper rack for you particular vehicle.
Kit Contents
See Figure 1 and Table 1.
NOTE
A service manual for your motorcycle is available from your Harley-Davidson dealer.
WARNING
Do not exceed Tour-Pak weight capacity. Too much weight can cause loss of control, which could result in death or serious injury. (00401c)
NOTE
The luggage rack weight capacity is 25 lbs (11.34 kg).
INSTALLATION
1. Remove the foam mat from the bottom of the Tour-Pak.
2. Ensure the holes in the bottom of the Tour-Pak are unobstructed so that the mounting screws may pass through easily.
3. Attach Tour-Pak to rack using the mounting screws. Insert screws through the inside of Tour-Pak. Tighten.
Torque: 6.8–8.1 N·m (5–6 ft-lbs)
4. Place foam mat into the bottom of the Tour-Pak.
5. Install Tour-Pak assembly onto vehicle according to kit instructions or service manual instructions.
SERVICE PARTS
Figure 1. Service Parts: Leather Tour-Pak (Typical)
Table 1. Service Parts
Kit
Item
Description (Quantity)
Part Number
53000570
53000598
53000599
1
Tour-Pak backrest
53000570, 53000599)
53000589
Tour-Pak backrest
(53000598)
53000615
2
Tour-Pak hinge
Not sold separately
3
Tour-Pak tub assembly
Not sold separately
4
Tour-Pak lid assembly
Not sold separately
5
Screw, hex socket button head (3)
923
6
Screw, button head cap (4)
4869
7
Washer (7)
6703
8
Lock nut (4)
7686
9
Rivet (8) (not shown)
Not sold separately
10
Tour-Pak support plate
Not sold separately
11
Tour-Pak tether
Not sold separately
12
Tour-Pak liner
Not sold separately
13
Tour-Pak support bracket
Not sold separately
14
Tour-Pak buckle assembly
(53000599) (not shown)
53000609