Softail Accessory Handlebar Shim Kit
J065482017-08-22
GENERAL
This kit is used to enable a 1.25 in diameter accessory handlebar to be mounted into a 1.50 in clamp and riser.
Kit Number
55800789
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for this year/model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
PREPARE
| 1. | Remove main fuse. See the service manual. | |
| 2. | Remove handlebar. See the service manual. |
INSTALL
| 1. | See Figure 2. Install shims (1). a. See Figure 1. Install shim into lower risers (2). b. Install shim into upper risers (1). |
| 1 | Upper shim |
| 2 | Lower shim |
Figure 1. Handlebar Shims In-Place
COMPLETE
| 1. | Install handlebar. See the service manual. | |
| 2. | Install main fuse. See the service manual. |
SERVICE PARTS
Figure 2. Service Parts: Softail Accessory Handlebar Shim Kit
Table 1. Service Parts: Softail Accessory Handlebar Shim Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Handlebar shim, black (4) | Not sold separately |