1. | Install footboard supports if not currently installed. | |||||||||||
2. | See Figure 2. Place footboard pad (1) on footrest (3) and thread the insert mounting pins (4). | |||||||||||
3. | Tighten mounting pins. Torque: 6.8–9 N·m (60–80 in-lbs) NOTE The footboards are side-specific. Install footboards with the Bar-and Shield logo toward the front. | |||||||||||
4. | See Figure 1. Obtain spring and ball from footboard support kit. Place spring into retaining hole (2) in footboard support (3). Rest ball on top of spring. | |||||||||||
5. | Position footrest (5) onto footboard support bracket (3), while being careful not to unseat steel ball. | |||||||||||
6. | Tighten pins. Torque: 16.3–20 N·m (12–15 ft-lbs) |
Figure 1. Footboard Support and Footrest | ||||||||||
7. | Press down on footrest so holes align. Insert footboard mounting pins (1, 4) through footrest and through the two mounting lugs on footboard support. Check to be certain ball is seated in detent at underside of footrest. | |||||||||||
8. | Repeat for other side. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Passenger footboard insert ass., left | 50391-05 |
2 | Footboard mounting pin (2) | 42719-05 |
3 | Passenger footboard housing, left | 50398-05 |
4 | Insert mounting pin (4) | 50395-05 |
5 | Footboard mounting pin (2) | 42723-05 |
6 | Passenger footboard housing, right | 50397-05 |
7 | Passenger footboard insert ass., right | 50390-05 |