1. | Remove the acorn nuts from the inside-center, left and right on the horizontal windshield bracket. | |||||||||||||||
2. | Apply protective tape strips to the horizontal windshield bracket to protect chrome finish. | |||||||||||||||
3. | Place windshield bag and bracket with eyelets over screws in the horizontal windshield bracket. Mark the location of the vertical supports for correct placement of the rubber bumpers to protect the bottom of the bag bracket. Place two bumpers each at the marked locations of the vertical windshield supports. | |||||||||||||||
4. | Align the metal brace with the eyelets, to fit snugly onto the windshield horizontal bracket screws. | |||||||||||||||
5. | Fasten the acorn nuts removed in step 1 onto the screws through the eyelets under the windshield bag. Torque the nut. Torque: 10.2–12.4 N·m (90–110 in-lbs) | |||||||||||||||
6. | To keep this surface in the best condition, lightly wipe with a Harley-Davidson Micro Fiber cloth, part number 94663-02, using clear water or a mild Harley-Davidson cleaner such as: NOTE The brace under the bottom of the windshield bag conforms to the contour of the windshield bracket as the acorn nuts are torqued. NOTE These cleaners are available separately or as part of the Harley Care Starter Kit, part number 94671-99 from any Harley Davidson Dealer. a. Sunwash (part number 94659-98) b. Bug Remover (part number 94657-98) or c. Harley Gloss (part number 94627-98) |
Figure 1. Bottom of Fairing Pouch
Figure 2. Fairing Clip Attachment, Side View |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Multi-pocket fairing pouch | Not Sold Separately |