Kits | Suggested Tools | Skill Level(1) |
---|---|---|
49000191 | Safety Glasses, Torque Wrench |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | Skid plate | Not sold separately | ||
2 | 6 | Grommet | 12100166 | ||
3 | 6 | Spacer | 12400190 | ||
Items mentioned in text, but not included in kit | |||||
A | 6 | Original Equipment (OE) Screw |
1. | See Figure 2. Verify the assemble of the skid plate (1). NOTE Spacers (3) are required to be installed from inside facing outward. a. Install grommet (2). b. Install spacer (3). |
1. | See Figure 3. Position new skid plate (1) assembly. NOTE If heat shield is present on catalyst, loosen, rotate and tighten clamps in a position were they do not interfere with skid plate or remove heat shield and clamps completely. | |
2. | Install all OE screws (A). Hand tighten. | |
3. | Verify fitment of skid plate. | |
4. | Tighten all screws. See the service manual. |