FLAG SISSYBAR MOUNTING KIT
J030882023-01-09
GENERAL
Kit Number
94616-98, 94836-02, 94840-07, 94900-03, 61400202, 61400374, 61400721
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
Flags are not intended for highway use. The construction of these flags will not hold up to the wind speeds seen at highway speeds. These flags are designed for parade use only.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Cable strap (4) | 10006 |
Mast, flag, sissy bar mount | Not sold separately |
Retainer, flag mast | Not sold separately |
Flag, standard, sissy bar mount | 94625-98 |
Flag, 100th anniversary, sissy bar mount | 94838-02 |
Flag, POW-MIA, sissy bar mount | 94902-03 |
Flag, 105th anniversary, sissy bar mount | 94842-07 |
Flag, 110th anniversary, upright mount | 61400203 |
Flag, wounded warrior, upright mount | 61400376 |
Flag, 120th anniversary, sissy bar mount | 61400720 |
INSTALL
NOTE
On some sissybars, removal of the pad will be necessary before installing the flag mast.
| 1. | Figure 1 Install flag mast (1) with two cable straps (2). a. Remove sissy bar pad, if necessary. b. Hold flag mast in desired position against sissy bar. c. Figure 2 Insert two cable straps as shown (with ends of cable straps against interior side of flag mast). d. Pull cable straps as snug as possible to secure flag mast to sissybar, then trim cable strap ends. NOTE Only two cable straps are required to secure the flag mast. Fasten on cable strap through sissybar, then trim the cable strap ends. |
| 1 | Flag mast |
| 2 | Cable straps |
Figure 1. Exterior View of Installed Flag Mast
| 1 | Cable straps |
Figure 2. Inerior View of Installed Flag Mast