Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
29400449A, 29400450A, 29400451A | Safety Glasses, Torque Wrench |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | Screamin' Eagle® (SE) High-Flow Air Filter-Round | 29400428 | Replacement air filter | |
2 | 1 | California EO label | 14003087A | Not sold separately | |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | SE Round High-Flow Air Filter-Homeplate | 29400426 | Replacement air filter | |
2 | 1 | California EO label | 14003210A | Not sold separately | |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | SE Extreme-Flow Air Filter | 29400427 | Replacement air filter | |
2 | 1 | California EO label | 14003211A | Not sold separately | |
| 1. | Place information label on right down tube of frame directly below Vehicle Identification Number (VIN) label. | |
| 2. | Do Not install this product label over other product information labels. | |
| 3. | This product information label must not be installed on other vehicles than specified. |
Description | Kit Part Numbers | EO Label Part Number |
|---|---|---|
California EO Label | 29400449A | 14003087A |
29400450A | 14003210A | |
29400451A | 14003211A |
| 1. | Remove main fuse. See service manual. |
| 1. | RA1250, RH1250: Remove seat. See service manual. | |
| 2. | Remove: a. RH975: Top cover. See service manual. b. RA1250, RH1250: Fuel tank. See service manual. | |
| 3. | Remove air box cover. See service manual. | |
| 4. | Figure 1 Remove Original Equipment (OE) air filter. |
| 1 | OE Air filter |
| 2 | Velocity stacks |
| 3 | Clamp |
| 4 | Round SE Air Filter |
| 5 | Extreme SE Air Filter |
| 6 | Homeplate SE Air Filter |
| 1. | Figure 1 Install SE air filter. a. Vacuum out any debris from air box base. b. Install one of the SE air filter's (4, 5 or 6). Position filter as shown. c. Tighten clamp (3). See service manual. | |
| 2. | Remove cloth from velocity stacks (2). |
| 1. | Install air box cover. See service manual. | |
| 2. | Install: a. RH975: Top cover. See service manual. b. RA1250, RH1250: Fuel tank. See service manual. | |
| 3. | RA1250, RH1250: Install seat. See service manual. | |
| 4. | Install main fuse. See service manual. |