MID CONTROL SHIFT LINKAGE

941005332023-01-19

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
33600403	Safety Glasses, Torque Wrench

(1) Tightening to torque value or other moderate tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Revolution Max Mid Control Shift Linkage

Table 2. Kit Contents: Revolution Max Mid Control Shift Linkage

	Verify that all contents are present in the kit before installing or removing items from vehicle.
	Item	Qty	Description	Part No.	Notes
	1	1	Mid control linkages, black	33600403

GENERAL

Models

For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

Installation Requirements

WARNING

Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)

NOTE

This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:

A Harley-Davidson dealer.
H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.

PREPARE

Remove main fuse

REMOVE

1.	Figure 2 Remove shifter linkage. a. Remove screw (3). b. Remove screw (1) and washer (4). c. Remove shifter link assembly (2).
2.	Figure 3 Remove screw (3) and OE shifter link (2) from foot shifter (1).

1	Screw
2	Shifter link assembly
3	Screw
4	Washer

Figure 2. Shifter Link Assembly

1	Foot shifter
2	Shifter link
3	Screw

Figure 3. Foot Shifter

INSTALL

1.	Figure 3 Install shifter link (2) to foot shifter (1) install screw (3). Tighten. Torque: 10–12.5 N·m (89–111 in-lbs)
2.	Figure 2 Install shifter linkage. a. Install new shifter linkage (2). b. Install screw (3). Tighten. Torque: 10–12 N·m (89–106 in-lbs) c. Install washer (4) and screw (2). Tighten. Torque: 24.5–30 N·m (18–22 ft-lbs)

COMPLETE

Install main fuse