SHIFTER PEG KIT
J031662024-01-23
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
33946-05, 33600008, 33600075, 33600154, 33600256, 33600257, 33600295, 33600303, 33600357, 33600383, 33600384, 33600411, 33600412 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Shifter Peg Kit
Table 2. Kit Contents: Shifter Peg Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Spacer | 50784-07 | Kit 33946-05 |
| Not sold separately | Kit 33600383, 33600384 | |||
| |||||
| 2 | 1 | Cover | 33947-05 | Kit 33946-05 |
| 3 | 1 | Tread | Not sold separately | Kit 33946-05 |
| 4 | 1 | Screw | 10200594 | Kit 33946-05 |
| 94545-03 | Kit 33600008 | |||
| 4196 | Kit 33600075 | |||
| 10500108 | Kits 33600256, 33600383 | |||
| 10500107 | Kits 33600257, 33600384, 33600411, 33600412 | |||
| 10201005 | Kits 33600295, 33600303, 33600357 | |||
| 10200853 | Kit 33600154 | |||
| 5 | 1 | Lockwasher | 7041 | Kits 33600075, 33600154, 33600256 |
| 7042 | Kits 33600295, 33600303 | |||
| 10300230 | Kit 33600357 | |||
| 7127 | Kit 33600383 | |||
| 7155 | Kits 33600257, 33600384 | |||
| 6 | 1 | Shifter peg assembly | 33600007 | Kit 33600008 |
| 33600056 | Kit 33600075 | |||
| 33600098 | Kit 33600154 | |||
| 33600251 | Kit 33600256 | |||
| 33600244 | Kit 33600257 | |||
| Not sold separately | Kits 33600295, 33600303 | |||
| 33600369 | Kit 33600357 | |||
| Not sold separately | Kits 33600383, 33600384 | |||
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
| 1. | Remove existing shifter peg. |
INSTALL
| 1. | Kits 33946-05, 33600008: Assemble shifter peg, if necessary. a. Insert spacer tube (1) in tread (3). b. Install tread with spacer tube insert into chrome cover (2). c. Verify that the tread is oriented properly. | |
| 2. | Kits 33946-05, 33600008: a. Install shifter peg assembly (6) and screw (4) to shift lever. Do not tighten. | |
| 3. | Kits 33600075, 33600154, 33600256, 33600257, 33600295, 33600303, 33600357: a. Install shifter peg assembly (6), screw (4) and washer (5). b. Position washer between shifter peg and shift lever. Do not tighten. | |
| 4. | Kits 33600294, 33600303: Place washer under bolt head. | |
| 5. | Rotate shifter peg (6) to desired orientation. | |
| 6. | Tighten screw (4). Torque: 16.3–18.9 N·m (144–167 in-lbs) |