MIRROR KITS

941004192024-01-23

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
91697-06B, 92190-06A, 56000135A, 56000262A, 56000294A, 56000301A, 56000305A, 56000394, 56000406	Safety Glasses, Torque Wrench

(1) Tightening to torque value or other moderate tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Mirror Kits

Table 2. Kit Contents: Mirror Kits

Verify that all contents are present in the kit before installing or removing items from vehicle.
Item	Qty	Description	Part No.	Notes
1	1	Mirror, right, chrome	92062-06B	Kit 91697-06B (Profile, slotted stem)
	1		92191-06A	Kit 92190-06A (Split Vision)
	1		56000306A	Kit 56000301A (Empire)
	1		56000395	Kit 56000394 (Willie G. Skull)
	1	Mirror, right, black	56000126A	Kit 56000135A (Profile, solid stem)
	1		56000275A	Kit 56000262A (66 Collection)
	1		56000295A	Kit 56000294A (Empire)
	1		56000299A	Kit 56000305A (Empire, edge cut)
	1		56000402	Kit 56000406 (Willie G. Skull)
2	1	Mirror, left, chrome	92063-06B	Kit 91697-06B (Profile, slotted stem)
	1		92198-06A	Kit 92190-06A (Split Vision)
	1		56000302A	Kit 56000301A (Empire)
	1		56000396	Kit 56000394 (Willie G. Skull)
	1	Mirror, left, black	56000125A	Kit 56000135A (Profile, solid stem)
	1		56000274A	Kit 56000262A (66 Collection)
	1		56000300A	Kit 56000294A (Empire)
	1		56000303A	Kit 56000305A (Empire, edge cut)
	1		56000404	Kit 56000406 (Willie G. Skull)
3	2	Flat washer, chrome	6771A	Kits 91697-06B, 92190-06A, 56000301A, 56000394
3	2	Flat washer, black	12404	Kits 56000135A, 56000262A, 56000294A, 56000305A, 56000406
4	2	Lock washer, chrome	7127	Kits 91697-06B, 92190-06A, 56000301A, 56000394
4	2	Lock washer, black	7155	Kits 56000135A, 56000262A, 56000294A, 56000305A, 56000406
5	2	Acorn nut, chrome	7331	Kits 91697-06B, 92190-06A, 56000301A
	2	Acorn nut, chrome	10400083	Kit 56000394
	2	Acorn nut, black	7352	Kit 56000135A
	2	Acorn nut, black	10400082	Kits 56000262A, 56000294A, 56000305A, 56000406

GENERAL

Models

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

ALL MODELS (EXCEPT XG AND REV MAX MODELS)

1.	Remove and discard existing mirror, washer and acorn nut.
2.	See Figure 2. Install flat washer (2) on mirror stud.
3.	Vehicles with turn signals mounted to underside of hand lever housings (except 2004 and later XL models): Secure mirror using lockwasher (3) and acorn nut (4).
4.	Vehicles with turn signals mounted away from hand lever housings: a. Install mirror stud to hand lever housing. b. Secure mirror with flat washer (2), lockwasher (3) and acorn nut (4).
5.	Adjust mirrors for proper field of vision and tighten. Torque: 14–16 N·m (10–12 ft-lbs) a. Check adjustment and reposition if necessary. b. Verify full swing of handlebars, in both directions, to ensure turn signals and other components do not touch the tank.

Figure 2. Mirror Assembly

XG MODELS

1.	See Figure 3. Remove mirror. a. Remove tube nut (3). b. Remove mirror (1). c. Remove mirror mount (4).
2.	Install mirror. a. Install mirror mount (4). Tighten. Torque: 11.7–14.3 N·m (104–127 in-lbs) b. Install tube nut (3) to mirror stem (2). c. Install mirror and tube nut to mirror mount. d. Adjust mirror (1). Tighten tube nut. Torque: 11.7–14.3 N·m (104–127 in-lbs)

Figure 3. Mirror

MIRROR PIVOT TENSION ADJUSTMENT

See Figure 4. Adjust pivot tension.

a. Incrementally secure adjustment screws (1). Tighten.

Torque: 1.1–4 N·m (10–35 in-lbs)

b. Check mirror pivot resistance and continue to tighten as needed. Do not exceed 35 in-lbs.

1	Adjustment screw (2)

Figure 4. Pivot Tension Adjustment Screws