ADVENTURE DUFFEL BAG
941001162023-08-23
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
93300142 | Safety Glasses |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Soft Duffel Tail Bag
Table 2. Kit Contents: Soft Duffel Tail Bag
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | Soft duffel bag | Not sold separately | ||
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
INSTALL (Duffel Only)
| 1. | Install duffel on passenger pillion. a. Logo and reflector strip face rearward. | |
| 2. | See Figure 4 and Figure 5. Loop mounting straps (2, 3) through the pockets on the hand hold base (4). | |
| 3. | Adjust tension and lock down cam buckles. |
| 1 | Right hand hold base |
Figure 2. Right Hand Hold Base
| 2 | Left hand hold base |
Figure 3. Left Hand Hold Base
| 1 | Top strap |
| 2 | Rear strap |
| 3 | Front strap |
| 4 | Hand hold base |
Figure 4. Right Side of Duffel
| 1 | Top strap |
| 2 | Rear strap |
| 3 | Front strap |
| 4 | Hand hold base |
Figure 5. Left Side of Duffel
INSTALL
Duffel with Soft Saddlebags
| 1. | Install duffel on passenger pillion. a. Logo and reflector strip face rearward. | |
| 2. | See Figure 6 and Figure 7. Loop two rear mounting straps (2) around saddlebag support frame assembly (3). | |
| 3. | Figure 8 Loop two front mounting straps (2) around saddlebag support frame assembly (3) in front of saddlebag pillion strap. | |
| 4. | Adjust tension and lock down cam buckles. a. Use elastic loops to secure any excess strap. |
| 1 | Duffel tail bag |
| 2 | Rear strap |
| 3 | Left saddlebag support assembly |
Figure 6. Left Soft Saddlebag
| 1 | Duffel tail bag |
| 2 | Rear strap |
| 3 | Right saddlebag support assembly |
Figure 7. Right Soft Saddlebag
| 1 | Duffel tail bag |
| 2 | Front strap |
| 3 | Left saddlebag support assembly |
Figure 8. Left Front View of Duffel
Duffel with Hard Side Cases
| 1. | Figure 9 Install Adventure duffel bag (1) on passenger pillion. | |
| 2. | Loop mounting straps around front and rear cross tubes (3, 4). | |
| 3. | Adjust tension and lock down cam buckles. a. Use elastic loops to secure any excess strap. |
| 1 | Adventure duffel bag |
| 2 | Right hard side case |
| 3 | Front cross tube |
| 4 | Rear cross tube |
Figure 9. Strap Locations