BRAKE PEDAL PAD

941001962022-08-08

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
50600483, 50600517, 50600518	Safety Glasses, Torque Wrench

(1) Tightening to torque value or other moderate tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Brake Pedal Pad

Table 2. Kit Contents: Brake Pedal Pad Kit

	Verify that all contents are present in the kit before installing or removing items from vehicle.
	Item	Qty	Description	Part No.	Notes
	1	1	Brake pedal pad assembly	Not sold separately
	2	4	Lockwasher	10300230
	3	4	Screw	10201191	19.7 N·m (15 ft-lbs)
	3	4	Screw, Kits 50600517, 50600518	10201323	19.7 N·m (15 ft-lbs)
Items mentioned in text, but not included in kit
	A	1	Brake lever

GENERAL

Models

For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

Installation Requirements

Requires separate purchase of model-specific brake lever (Part No. 41600348 or 41600370).

WARNING

Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)

REMOVE

1.	Remove previously installed brake pedal from foot brake lever (A).
2.	If necessary, replace brake lever per brake lever instructions.

INSTALL

1.	Figure 1 Align new brake pedal pad (1) with end of foot brake lever (A). Make sure to insert tab on brake pedal pad into slot in brake lever.
2.	Assemble lockwasher (2) and screw (3).
3.	Thread screw (3) into in foot brake lever (A) and into back of brake pedal pad (1). Tighten. Torque: 19.7 N·m (15 ft-lbs)