TOURING SEAT
J063852016-08-22
GENERAL
Kit Number
52000252
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
This kit contains one seat and one grab strap.
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
- See the owner's manual. Remove the seat and grab strap.
- See Figure 1. Slide the new seat into position until the slot in the seat base engages the frame tab and the rear of the seat locates over the rear mounting point in the fender. Install the seat mounting screw.
WARNINGAfter installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b)
| 1 | Fuel tank bracket tongue |
| 2 | Slot in underside of seat |
Figure 1. Seat Front Mounting
SERVICE PARTS
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Seat | Not sold separately |
2 | Grab strap | 52400099 |
3 | Screw | 2952A |