1. | Install the OE clamps to the new exhaust shields. | |
2. | See Figure 2. Spread the band around the exhaust pipes and push the end of the bands to engage the clamp screws. Tighten to hold the exhaust shields in place. | |
3. | Adjust the shields and band clamps to access clamp screws and to avoid contact with other components. | |
NOTICE Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a) | ||
4. | Position the clamp screws. Tighten. Torque: 2.3–4.6 N·m (20–41 in-lbs) |
1 | Exhaust shield clamp |
2 | Exhaust shield |
KIT | ITEM | Description (Quantity) | Part Number |
---|---|---|---|
65400458 | 1 | Shield, exhaust, rear, satin black | 65400450 |
2 | Shield, exhaust, front, satin black | 65400449 | |
3 | N/A | N/A | |
65400459 | 1 | Shield, exhaust, rear, satin black | 65400455 |
2 | Shield, exhaust, front, satin black | 65400454 | |
3 | Shield, exhaust, mid, satin black | 65400456 | |
65400460 | 1 | Shield, exhaust, rear, satin black | 65400453 |
2 | Shield, exhaust, front, satin black | 65400452 | |
3 | N/A | N/A |