SOFTAIL QUARTER FAIRING
J067082020-10-16
Table 1.
Kits
Suggested Tools
Skill Level
Time
57001615xxx, 57001627
(Obsolete - Do Not Install On Vehicle: 57000980, 57000981xxx)
Safety Glasses, Torque Wrench
1
1 hour
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Service Parts: Rider Backrest Components
Table 2. Service Parts List: Rider Backrest Components
Item
Qty
Description
Part No.
Notes
1
1
Windshield
57400399
2
6
Nut, acorn
10100131
3
6
Washer, flat
10300189
4
6
Washer, rubber
10300211
5
6
Washer, special
10300212
6
6
Screw, pan head TORX, 8-32
10200999
2–2.3 N·m (18–20 in-lbs)
7
1
Quarter fairing
Not sold separately
GENERAL
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Make sure you are using the most current version of the instruction sheet which is available at: www.harley-davidson.com/isheets/-J0TEST1
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Separate purchase of Softail Quarter Fairing Bracket Kit (Part No. 57001249 or 57001250) is required for this installation.
ASSEMBLE
1. See Figure 1. Install windshield (1) to quarter fairing (7).
2. Loosely install hardware (2-6).
3. Start from the front working toward the rear, tighten hardware.
Torque: 2–2.3 N·m (18–20 in-lbs)
INSTALL
1. Align quarter fairing posts to grommets and push.