MIRROR KITS
J054142024-01-24
GENERAL INFORMATION
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
91315-04, 91657-02, 91696-05A, 91697-06A, 91965-98, 92096-05, 92190-06, 92398-09, 92410-09, 92416-08, 92423-08, 92441-10, 56000006, 56000090, 56000135, 56000136, 56000137, 56000171, 56000262, 56000294, 56000301, 56000305, 56000343, 56000344
Safety Glasses, Torque Wrench
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Mirror Kits
Table 2. Kit Contents: Mirror Kits
Verify that all contents are present in the kit before installing or removing items from vehicle.
Item
Qty
Description
Part No.
Notes
1
4
Flat washer
6771A (silver)
6926 (black)
For all other kits
2
Flat washer, black
12404 (black)
Kits 56000135, 56000171, 56000294, 5600305
2
2
Lockwasher
7127 (silver)
7155 (black)
7155
Kit 56000301
3
2
Acorn nut
7736 (silver)
8196 (black)
7331 (silver)
Kit 56000301
7352 (black)
Kits 56000135, 56000294, 56000305
10400082 (black)
Kits 56000343, 56000344
4
1
Mirror, left / right
Not sold separately
Kits 91315-04 (Willie G Skull, Chrome), 91965-98 (Aluminator), 92190-06 (Split Vision), 92398-09 (Tribal Black), 92410-09 (Tribal, Chrome), 92441-10 (Edge Cut Stem), 56000006 (Slipstream), 56000090 (Edge Cut Dome), 56000171 (Willie G Skull, Blk)
Mirror, left
Mirror, right
91928-03
91927-03
Kit 91657-02 (Bullet)
Mirror, left
Mirror, right
92176-05A
92175-05A
Kit 91696-05A (Tailfin)
Mirror, left
Mirror, right
92063-06A
92062-06A
Kit 91697-06A (Profile Custom)
Mirror, left
Mirror, right
91949-05
91987-05
Kit 92096-05 (Buckshot Chrome)
Mirror, left
Mirror, right
92417-08
92419-08
Kit 92416-08 (Buckshot Black)
Mirror, left
Mirror, right
92424-08
92426-08
Kit 92423-08 (Dome Billet)
Mirror, left
Mirror, right
56000125
56000126
Kit 56000135 (Airflow, Black)
Mirror, left
Mirror, right
56000138
56000139
Kit 56000136 (Dominion, Black)
Mirror, left
Mirror, right
56000146
56000147
Kit 56000137 (Dominion, Bronze)
Mirror, left
Mirror, right
56000274
56000275
Kit 56000262 (66 Collection, Black)
Mirror, left
Mirror, right
56000300
56000295
Kit 56000294 (Empire, Black)
Mirror, left
Mirror, right
56000302
56000306
Kit 56000301 (Empire, Chrome)
Mirror, left
Mirror, right
56000303
56000299
Kit 56000305 (Empire, Black Edge Cut)
Mirror, left
Mirror, right
56000372
56000370
Kit 56000343 (Switchback, Black)
Mirror, left
Mirror, right
56000373
56000371
Kit 56000344 (Switchback, Silver)
5
2
Adjustment screw
Not sold separately
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
XG MODELS
REMOVE
1. See Figure 2. Remove mirror.
a. Remove mirror (1).
b. Remove tube nut (3).
c. Remove mirror mount (4).
INSTALL
1. See Figure 2. Install mirror.
a. Install mirror mount (4). Tighten.
Torque: 11.7–14.3 N·m (104–127 in-lbs)
b. Install tube nut (3) to mirror stem (2). Hand tighten.
c. Install mirror and tube nut to mirror mount. Hand tighten.
d. Adjust mirror.
e. Tighten tube nut.
Torque: 11.7–14.3 N·m (104–127 in-lbs)
1Mirror
2Mirror stem
3Tube nut
4Mirror mount
Figure 2. Mirror
ALL OTHER MODELS
REMOVE
1. Remove and discard existing mirror.
a. Discard any lockwashers and acorn nuts used to mount Original Equipment (OE) mirror.
INSTALL
1. See Figure 1. Install flat washer (1) on mirror stud (top position) for all mirrors expect Part No. 91696-05A, 92398-09 and 92410-09.
2. Vehicles with turn signals mounted to underside of hand lever housings (except 2004 and later XL models): Secure left side mirror with lockwasher (2) and acorn nut (3) from kit.
3. Secure right side mirror with lockwasher (2) and acorn nut (3) from kit and turn signal retainer only.
4. Vehicles with turn signals mounted away from hand lever housings: Insert mirror studs into holes in hand lever housings.
a. Secure mirrors with flat washers (1) in top and bottom positions, lockwashers (2) and acorn nuts (3) from kit.
5. Adjust mirrors for proper field of vision and tighten. Check adjustment and reposition if necessary.
NOTE
Harley-Davidson Motor Company cannot test, and make specific fitment recommendations concerning every possible mirror, and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating vehicle, check that mirrors provide operator a clear view to the rear.
a. Tighten acorn nut (3).
Torque: 14–16 N·m (10–12 ft-lbs)
Mirror Pivot Adjustment
1. Kits 56000136, 56000137, 56000171: Adjust pivot tension.
a. See Figure 1. Incrementally torque adjustment screws (5) as required. Tighten.
Torque: 1.1–4 N·m (10–35 in-lbs)
b. Check mirror pivot resistance and continue to torque as needed. Do not exceed 35 in-lbs.