BRAKE PEDAL PAD KIT
J065292021-08-02
GENERAL
Kit Numbers
50600248, 50600255, 50600256, 50600257, 50600258, 50600259, 50600466, 50600467, 50600468
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
REMOVE
1. Remove brake pedal pad from vehicle foot brake lever. Discard pad.
INSTALL
Small Brake Pedal Pads: Kits 50600248, 50600255, 50600256
1. See Figure 1. Align new brake pedal pad (1) with recess in trim cover (2).
2. Insert threaded stud through holes in trim cover and vehicle foot brake lever.
3. Install plain washer (3) onto threaded stud.
4. Thread 1/4-20 hex locknut (4) onto stud. Tighten.
Torque: 13.6 N·m (10 ft-lbs)
Large Brake Pedal Pads: Kits 50600257, 50600258, 50600259, 50600466, 50600467, 50600468
1. Figure 2 Align new brake pedal assembly (1) with vehicle foot brake lever.
2. Install plain washer (2) onto bolt (3).
3. Thread bolt through foot brake lever and into brake pedal assembly. Tighten.
Torque: 26 N·m (19 ft-lbs)
NOTE
SERVICE PARTS
Figure 1. Service Parts: Small Brake Pedal Pad Kit
Table 1. Service Parts: Small Brake Pedal Pad Kit
Item
Description (Quantity)
Part Number
1
Pad, brake pedal
Not sold separately
2
Trim cover, brake pedal
Not sold separately
3
Washer
6703
4
Hex locknut, 1/4-20
7686
Figure 2. Service Parts: Large Brake Pedal Pad Kit
Table 2. Service Parts: Large Brake Pedal Pad Kit
Item
Description (Quantity)
Part Number
1
Brake pedal assembly
Not sold separately
2
Washer
6333
3
Bolt
3540
Bolt (Kits 50600466, 50600467, 50600468)
10201203