BRAKE PEDAL PAD KIT
J065112019-08-21
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) | Time |
|---|---|---|---|
Pedal Kits: 50600266, 50600267, 50600268,50600269, 50600346, 50600347 Trim Kits: 50600290, 50600291, 50600292, 50600293, 50600294, 50600295, 50600296, 50600297, 50600365, 50600366, 50600367, 50600368 | Safety Glasses, Torque Wrench |  | 1 hour |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Brake Pedal Pad Components
Table 2. Kit Contents: Brake Pedal Pad Components
 | Item | Qty | Description | Part No. | Notes |
|---|---|---|---|---|---|
 | 1 | 1 | Brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347, 50600365, 50600366, 50600367, 50600368 | Not sold separately | |
| Brake pedal pad, small, Kits 50600267, 50600269 | Not sold separately | |||
| 2 | 1 | Trim, brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347, 50600365, 50600366, 50600367, 50600368 | Not sold separately | |
| Trim, brake pedal pad, small, Kits 50600267, 50600269 | Not sold separately | |||
| 3 | 2 | Screw, button head, Kits 50600266, 50600267, 50600268, 50600269 | 50600323 | Torque: 1.7 - 2.3 Nm (15 - 20 in-lbs) |
| Screw, button head, Kits 50600346, 50600347 | 10200662 | Torque: 1.7 - 2.3 Nm (15 - 20 in-lbs) | ||
| 4 | 1 | Insert, brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347 | Not sold separately | |
| Insert, brake pedal pad, small, Kits 50600267, 50600269 | Not sold separately | |||
| 5 | 1 | Washer, Kits 50600266, 50600267, 50600268, 50600269 | 12408 | |
| Washer, Kits 50600346, 50600347 | 6333 | |||
| 6 | 1 | Screw, socket head, Kits 50600266, 50600267, 50600268, 50600269, 50600346, 50600347 | 10200663 | Torque: 26 Nm (19 ft-lbs) |
Items mentioned in text, but not included in kit. | |||||
| A | Foot brake lever | |||
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Verify that the most current version of the instruction sheet is used. It is available at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
| 1. | Remove previously installed brake pedal cover from foot brake lever (A). |
INSTALL
| 1. | See Figure 1. Align and slide new brake pedal pad (1) and insert (4) over the end of foot brake lever (A). | |
| 2. | Assemble plain washer (5) and screw (6). | |
| 3. | Thread screw (6) through hole in foot brake lever (A) and into back of brake pedal pad (1). Tighten. Torque: 26 N·m (19 ft-lbs) |
REPLACE TRIM or WEAR PEG
| 1. | See Figure 1. Remove screws (3). | |
| 2. | Replace trim or wear peg (2) as applicable. | |
| 3. | Apply one drop of threadlocker to screws (3).LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 4. | Install screws (3). Tighten. Torque: 1.7–2.3 N·m (15–20 in-lbs) |