FOOTPEG BOLT KIT

J020482022-08-05

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
94133-01 (Chrome)	Safety Glasses, Torque Wrench, Loctite 243 Blue

(1) Tightening to torque value or other moderate tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Footpeg Screw Kit

Table 2. Kit Contents: Footpeg Screw Kit

Verify that all contents are present in the kit before installing or removing items from vehicle.
Item	Qty	Description	Part No.	Notes
1	2	Nut, chrome	8023
2	2	Washer, chrome	94128-01
3	2	Screw, TORX^®, button head, chrome	4233

GENERAL

Models

For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

Installation Requirements

WARNING

Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)

NOTE

The bolts supplied in this kit are designed for a one-time installation only. If this kit is removed after initial installation, you must re-apply Loctite 243 (Blue) to the threads of the bolts.

REMOVE

Remove nut (3) and screw (1) from footpeg mount (4). Discard nut and screw.

INSTALLATION

Apply threadlocker to screw (1).LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97)

Figure 2 Install footpeg with new washer (2) and screw (1).

Install new nut (3). Tighten.

Torque: 13.6–21.7 N·m (10–16 ft-lbs)

Repeat steps for opposite side.

1	Screw
2	Washer
3	Nut
4	Footpeg mount

Figure 2. Footpeg Screw Installation