| 1. | See Figure 1. Install the shields on the exhaust pipes. Tighten the band clamps enough to hold the exhaust shields in place. | |
| 2. | Adjust the shields and band clamps to avoid contact with other components. | |
| 3. | Tighten all clamp screws. | |
NOTICE Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a) | ||
| 4. | Wipe off all fingerprints. Oil from hands will burn permanently into finish. |
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Rear shield | not serviced separately |
2 | Front shield | not serviced separately |
Items mentioned but not included in kit | ||
A | Intermediate shield | |
B | Band clamps, intermediate shield (2) | |
C | Band clamps, front and rear shields (5) | |