Read the Quick Start Guide for additional information pertaining to the wireless headset operation. Also see www.H-D.com/infotainment-support for the latest version of User's Guide and related information to Boom! Audio Bluetooth products or visit your local Harley-Davidson dealership.

Before using the wireless headset with any Bluetooth devices for the first time, you will need to pair them together. For example, it can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle-specific Bluetooth Global Positioning System (GPS) navigation, and with other Boom! Audio Bluetooth headsets. This pairing operation is only required once for any Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within range. You will hear a high tone single beep and a voice prompt when the headset connects to the paired device automatically:

When a headset is paired to the motorcycle, it will say Your Headset is Paired, Boom! Audio Connected. After this initial pairing, every time the headset connects to the motorcycle you will hear Boom! Audio Connected.

When a headset is paired to a phone, it will confirm the pairing by saying Your Headset is Paired. After this initial pairing, every time the headset reconnects to the phone it will say Phone Connected.

The N02 30K has 14 configuration settings that can be accessed though the Boom! Box Infotainment system. Configuration options are available for Harley 10S, 20S, 20S EVO headsets and N02 30K helmets. They will not appear for non-Harley headsets or the SPH10.

Navigate: Home > Setup > Wireless Headset > Manage Rider or Passenger Headset > Config.

Smart Vol. Control: Automatically adjusts speaker volume based on the amount of environmental noise captured by the microphone. When it is disabled, volume is controlled manually. You can enable it by setting the sensitivity to low, medium, or high. The headset will respond to smaller environmental noises as the sensitivity level becomes higher. This factory setting is disabled.

SideTone: Sidetone is the sound of your own voice as picked up by your headset’s microphone and reproduced in your own ear, by your own speaker. It helps you to naturally speak at the correct level according to varying helmet noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation or a phone call. This factory setting is disabled.

Voice Prompt: You can disable voice prompts, but the following voice prompts are always on:

Adv. Noise Control: When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. This factory setting is enabled.

VOX Phone: If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough, unless you are connected to intercom. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying Hello or any other word loudly. However, the VOX Phone feature does not work if you are connected to the intercom. This feature is enabled from the factory but can be disabled through the configuration menu, Device Manager, or the Sena Smartphone App. If this mode is disabled, you have to tap the Jog Dial or the Phone Button to answer an incoming call.

HD Intercom: HD Intercom enhances the two-way intercom audio from normal quality to HD quality. HD Intercom will become temporarily disabled when you enter into a multi-way intercom. If this feature is disabled, the two-way intercom audio will change to normal quality. This factory setting is enabled.

Intercom-Audio Sensitivity (Intercom-Audio Overlay Sensitivity): The music, FM radio and GPS volume will be lowered to play in the background if you talk over the intercom while the overlaid audio is playing. Level 1 is the lowest sensitivity and you will have to speak very loud. Level 5 is the most sensitive and will trigger with very little sound. Pending on riding conditions this may need to be adjusted due to ambient noise. The factory setting is 3.

FM Station Guide: When enabled, FM station frequencies are given by voice prompts as you select preset stations. When disabled, the voice prompts on FM station frequencies will not be given as you select preset stations. This factory setting is enabled.

Radio Data System (RDS) Alternative Frequency (AF): When radio station signals get too weak for a good reception, with RDS AF enabled, the radio receiver re-tunes to a station with better reception. If RDS AF is disabled, you’ll have to find stronger stations manually. Factory Default is disabled.

VOX Intercom: Voice Activated Intercom. If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When you want to start intercom, say a word such as Hello loudly or blow air into the microphone. If you start an intercom conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually. This factory setting is disabled.

Audio Overlay Vol. (Audio Overlay Volume Management): The music, FM radio and GPS overlaid audio reduces in volume whenever there is an ongoing intercom conversation. If Audio Overlay Volume Management is enabled, the volume level of the overlaid audio will not be reduced during an intercom conversation. This factory setting is disabled.

Intercom VOX Sensitivity: The sensitivity can be adjusted depending on your riding environment. Level 5 is the highest sensitivity setting and 1 is the lowest. This factory setting is 3.

Guest Mode: Guest Mode allows a guest to listen to a closed Mesh conversation. The creator of the Mesh needs to enable Guest Mode before creating the Mesh to allow guests. Guest Mode can be enabled when the guest is in Public Mode and the Mesh Network connection information has been removed. The guest needs to be within range of the Mesh to listen to the closed Mesh conversation. This factory setting is disabled.

Voice Command: The voice command of the headset allows you to operate certain operations by simply using your voice. You can control the headset completely handsfree using the voice recognition. The voice command function works only with English commands. This factory setting is enabled.

When the Boom! Audio N02 30K is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The Boom! Audio N02 30K will be switched off and then turn the system back on and try again. However, this will not restore the headset to factory default settings.