0/0
SOFTAIL PASSENGER FOOTBOARD KIT
J065732024-11-01
GENERAL
Kit Numbers
50501113, 50501114, 50501117, 50501118
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
Proper installation of these kits require the separate purchase of the following parts which are available at a Harley-Davidson dealer.
Kit Contents
See Figure 8 , Figure 9 , Figure 10 and Table 1.
INSTALLATION
Right Side
1. Beginning on right side of the vehicle, remove the existing foot peg and attaching hardware, if equipped. If not equipped, remove the plastic hole cover.
2. For FXBR/S, FXBB, FLFB/S, FLSL and FXLR models, see Figure 1. For FLSB, FLHC and FLDE models, see Figure 2. Position footboard mount. Apply Loctite 243 threadlocker to the socket head capscrew and insert it through the floor board assembly and proper adapter, and into the mounting hole.
Figure 1. Right Side Installation: FXBR/S, FXBB, FLFB/S, FLSL, FXLR
Figure 2. Right Side Installation: FLSB, FLHC, FLDE
3. Position the clocking mechanism in the adapter in the mount around the mating geometry on the vehicle.
4. Tighten footboard support mounting screw.
Torque: 61.0–67.8 N·m (45–50 ft-lbs)
5. See Figure 3. Insert spring into retaining hole in footboard support. Rest ball on top of spring.
Figure 3. Installing Ball and Spring
6. Position footboard pan (sold separately) onto footboard support. Be careful not to unseat ball.
7. Refer to the appropriate i-sheet for instructions on how to install the floorboard and pivot pins for your application.
Left Side
1. Remove the existing foot peg and attaching hardware, if equipped. If not equipped, remove the plastic hole cover.
2. For FXBR/S, FXBB, FLFB/S, FLSL and FXLR models, see Figure 4. For FLSB, FLDE and FLHC models, see Figure 5. Position footboard mount. Apply Loctite 243 threadlocker to the socket head capscrew and insert it through the floor board assembly and proper adapter, and into the mounting hole.
Figure 4. Left Side Installation: FXBR/S, FXBB, FLFB/S, FLSL, FXLR
Figure 5. Left Side Installation: FLSB, FLHC, FLDE
3. Position the clocking mechanism in the adapter in the mount around the mating geometry on the vehicle.
NOTE
For FXBR/S, FXBB, FLFB/S, FLSB and FLSL models with detachable saddlebags, see Figure 6. The provided pin and longer screw are to be inserted into the left adapter, and interface with the saddlebag docking point mount.
Figure 6. Detachable Saddlebag Mounting Method: Left Side
4. Tighten footboard support mounting screw.
Torque: 61.0–67.8 N·m (45–50 ft-lbs)
5. See Figure 3. Insert spring into retaining hole in footboard support. Rest ball on top of spring.
6. Position footboard pan (sold separately) onto footboard support. Be careful not to unseat ball.
7. Refer to the appropriate i-sheet for instructions on how to install the floorboard and pivot pins for your application.
Models with Saddlebag Guards
See Figure 7. For models with saddlebag guards installed, the longer screw must be used.
Figure 7. Saddlebag Guards with Long Screw
SERVICE PARTS
Figure 8. Service Parts: Kits 50501113 and 50501114
Figure 9. Service Parts: Kit 50501117
Figure 10. Service Parts: Kit 50501118
Table 1. Service Parts
Kit
Item
Description (Quantity)
Part Number
50501113
50501114
1
Floorboard support, passenger, Chrome (2)
Floorboard support, passenger, Black (2)
Not sold separately
2
Pivot pin (4)
50933-86A
3
Steel ball (2)
8860
4
Spring (2)
33085-74
50501117
1
Screw, socket head cap
4209
2
Footboard support adapter, RH (1)
Not sold separately
3
Anti-rotation pin
Not sold separately
4
Footboard support adapter, LH (1)
Not sold separately
5
Screw, hex socket
675
6
Screw, hex socket
4693
50501118
1
Screw, hex socket
4519
2
Screw, hex socket (2)
4693
3
Footboard support adapter, RH (1)
Not sold separately
4
Footboard support adapter, LH (1)
Not sold separately
5
Screw, socket head cap
4202
Items Mentioned in text, but not included in kits:
A
Floorboard (2)
B
Saddlebag guard