0/0
ACCESSORY UPPER CLUTCH CABLE KITS
J064532025-01-24
GENERAL INFORMATION
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
37200325, 37200326, 37200327, 37200328, 37200329, 37200375, 37200376, 37200377, 37200378, 37200379, 37200380, 37200381, 37200382, 37200383, 37200384, 37200385, 37200386, 37200387, 37200463, 37200464, 37200465, 37200466, 37200467, 37200468, 37200469, 37200470, 37200471, 37200553, 37200554, 37200555, 37200556, 37200557, 37200558, 37200559, 37200642, 37200643, 37200646
Safety Glasses, Torque Wrench
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Accessory Upper Clutch Cable
Table 2. Kit Contents: Accessory Upper Clutch Cable Kits
Verify that all contents are present in the kit before installing or removing items from vehicle.
Item
Qty
Description
Part No.
Notes
1
1
Clutch cable
Not sold separately
Kits: 37200325, 37200326, 37200327, 37200328, 37200329, 37200375, 37200376, 37200377, 37200378, 37200379, 37200380, 37200381, 37200382, 37200383, 37200384, 37200385, 37200386, 37200387, 37200463, 37200464, 37200553, 37200554, 37200555, 37200556, 37200557, 37200558, 37200559
2
4
Pin
12600180
3
1
Clutch cable, bent
Not sold separately
Kits: 37200465, 37200466, 37200467, 37200468, 37200469, 37200470, 37200471
2
4
Pin
12600180
4
1
Clutch cable
Not sold separately
Kits: 37200642, 37200643, 37200646
GENERAL
Instruction sheet is also available electronically. To verify you are using the most current version available, do one of the following:
  • Go to h-d.com/isheets
  • Scan QR code in upper left corner of the instruction sheet
NOTE
This instruction sheet may have a Supplemental Video to assist installer in clarifying a certain part of the assembly. A linked video would be located at the end of this instruction sheet.
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
The rider's safety depends upon the correct installation of this kit. Dealer installation is required for vehicles equipped with ABS brakes. Proper installation of this kit requires the use of special tools available only through a Harley-Davidson Dealer. An improperly serviced brake system can adversely affect brake performance, which could result in death or serious injury. (00578b)
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
Kit Numbers
Table 3. 2018 - 2024 Softail Kit Contents
Upper Clutch Cable Kit
Length (mm)
Length (in)
37200325
1245
49.02
37200326
938
36.93
37200327
1040
40.94
37200328
1167
45.94
37200329
862
33.94
37200375
711
27.99
37200376
762
30.00
37200377
787
30.98
37200378
813
32.01
37200379
889
35.00
37200380
965
37.99
37200381
991
39.02
37200382
1016
40.00
37200383
1067
42.01
37200384
1092
42.99
37200385
1118
44.02
37200386
1143
45.00
37200387
1194
47.01
Table 4. 2025 Softail Kit Contents
Upper Clutch Cable Kit
Length (mm)
Length (in)
37200642
1006
39.61
37200643
960
37.80
37200646
895
37.79
Table 5. Touring Batwing Kit Contents
Upper Clutch Cable Kit
Length (mm)
Length (in)
37200465
1015
36.96
37200466
1067
42.01
37200467
1118
44.01
37200468
1143
45.00
37200469
1194
47.00
37200470
1040
40.94
37200471
1220
48.03
Table 6. Touring Non-Batwing Kit Contents
Upper Clutch Cable Kit
Length (mm)
Length (in)
37200463
1265
49.80
37200464
1354
53.31
37200553
1245
49.01
37200554
1143
45.00
37200555
991
39.00
37200556
1118
44.01
37200557
1194
47.00
37200558
1092
42.99
37200559
965
38.00
NOTE
The Upper Clutch Cable Kits are available in various cable lengths. Shorter or longer cables may be necessary when modifications (that is, optional handlebars) have been made to the motorcycle. See the Harley-Davidson Genuine Motor Accessories and Genuine Motor Parts Catalog for fitment and length information.
Damage to the clutch cable due to improper handling/installation is not covered under the Harley-Davidson Motor Company Warranty.
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
PREPARE
WARNING
To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables (negative (-) cable first) before proceeding. (00307a)
WARNING
Disconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00049a)
1. Disconnect the battery or main fuse. See service manual.
REMOVE
1. Record wire routing and cable strap locations before removal.
a. Install new cable straps in the proper locations.
2. Remove clutch cable. See service manual.
INSTALL
1. Install upper clutch cable (1). See service manual.
a. ALL Touring models: Routing of accessory upper clutch cable is to be same as stock routing.
b. Some Softail models: Clutch may need to be routed through triple clamp to ensure clearances.
2. Install stock clutch cable clips (2) onto downtube in their original positions.
3. After installation, follow instructions in the "Final Assembly" and "Clutch Cable Adjustment" sections in the appropriate service manual.
1Clutch cable
2Clutch cable clip
Figure 2. Clutch Cable Clip Placement (example)
COMPLETE
WARNING
Be sure that steering is smooth and free without interference. Interference with steering could result in loss of vehicle control and death or serious injury. (00371a)
WARNING
Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a)
1. Check to ensure the steering is smooth, with not interferences or line snap points.
2. Ensure clutch lever works smoothly with minimal effort.
3. Connect battery cables, positive cable first or connect main fuse. See service manual.