COIL COVER
J066172025-01-23
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
57300213, 57300214, 57300289, 57300416, 57300417, 57300418 | Safety glasses, Torque wrench, Flathead screwdriver |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Coil Cover
Table 2. Kit Contents: Coil Cover Kits
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Screw, chrome | 10200731 | Kit: 57300213 |
| Screw, black | 10200730 | Kit: 57300214 | ||
| Screw, zinc plated | 10201184 | Kits: 57300289, 57300416, 57300417, 57300418 | ||
| 2 | 1 | Coil cover | Not sold separately | |
| 3 | 1 | Spacer | 12400199 | Kits: 57300289, 57300416, 57300417, 57300418 |
| 4 | 1 | Washer | Not sold separately | Kits: 57300289, 57300416, 57300417, 57300418 |
| 5 | 1 | Pad, foam | Not sold separately | Kits: 57300416, 57300417, 57300418 |
| 6 | 3 | Mounting tape | Not sold separately | Kits: 57300416, 57300417, 57300418 |
| 7 | 3 | Mounting tape | Not sold separately | Kits: 57300416, 57300417, 57300418 |
| 8 | 1 | Insert, coil cover | Not sold separately | Kit: 57300416, 57300417, 57300418 |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
PREPARE
| 1. | Remove main fuse. See service manual. |
REMOVE
| 1. | Remove Original Equipment (OE) coil mounting screw. Discard. |
INSTALL
| 1. | Install coil cover over coil. a. Kits 57300213, 57300214: Screw (1) and coil cover (2). b. Kits 57300289, 57300416, 57300417, 57300418: Screw (1), washer (4), coil cover (2) and spacer (3). | |
| 2. | Tighten screw (1). a. Kits 57300213, 57300214 Torque: 14.9–18.9 N·m (11–14 ft-lbs) b. Kit 57300289 Torque: 14.9–16.3 N·m (11–12 ft-lbs) | |
| 3. | Kits 57300416, 57300417, 57300418: Install coil cover over coil. NOTE Ensure that the coil cover wraps around the top of coil pack when tightening screw (1). a. Install screw (1), washer (4) coil cover (2), spacer (3) and pad (5). b. Tighten screw (1). Torque: 17.6–18.9 N·m (13–14 ft-lbs) c. Install insert (8) to coil cover (2). | |
| 4. | Insert removal: a. Place edge of screwdriver into notch located at bottom of insert and coil cover. b. Gently pry outward to remove. |
COMPLETE
| 1. | Install main fuse. See service manual. |