Kits  | Suggested Tools  | Skill Level(1)  | 
|---|---|---|
76100034  | 5Ghz Wi-Fi  | 
| 1. | There are two ways to process a purchase order, one for Customer and the other for a Dealership. | |
| 2. | Perform PREPARE procedure. a. Customer and dealership follow this procedure.  | |
| 3. | Perform CUSTOMER or DEALERSHIP procedure. a. Customer: CUSTOMER PURCHASE PROCESS b. Dealership: DEALERSHIP PURCHASE PROCESS  | |
| 4. | Perform COMPLETE procedure. a. Customer and dealership follow this procedure.  | 
| 1. | Power ON vehicle in Accessory mode. See owner's manual. | |||
| 2. | Verify that the date and time are correct in the Infotainment Control Unit (IFCU). a. Navigate: Settings > System > Date and Time.  | |||
| 3. | See Figure 1. Select: Navigation icon (1). | 
 Figure 1. Navigation Icon  | ||
| 4. | See Figure 2. Confirm: If Navigation is not enabled on vehicle, a pop up window with a QR code (1) will appear. | 
| 1 | Navigation disabled with QR code | 
| 2 | Wi-Fi signal icon | 
| 1. | Purchase Skyline OS Embedded Navigation: Use mobile device to scan QR code or use computer and visit http://www.h-d.com/nav. a. After purchasing, 5-10 minutes will be required to confirm software update process and enable navigation for the VIN. b. Confirm: Email for Product purchase has been received. c. Confirm: Email for Embedded Navigation activation has been received.  | 
| 1. | Make sure vehicle is OFF. | |
| 2. | Order VIN restricted parts via TALON or HDNET. a. See HDNET or TALON For ordering instructions if needed Parts & Accessories Marketing Resources (h-dnet.com).  | |
| 3. | Once the order is placed in HDNET or TALON the order will process in approximately 3 minutes. a. TALON: When the order is sent and Order Acknowledgement report is viewed/printed, it will display the HDMC Order Number when complete. b. HDNET: The order acknowledgement gets updated with the HDMC Order Number when complete, in the HDNET the order status changes to Shipped.  | 
| 1. | Power OFF vehicle. See owner's manual. | |||||||||
| 2. | Put vehicle in Accessory mode. See owner's manual. | |||||||||
| 3. | Connect vehicle to a 5Ghz Wi-Fi network. a. See Figure 2. Wi-Fi icon (2) will be displayed on IFCU once Wi-Fi connection is established.  | |||||||||
| 4. | Power OFF vehicle. See owner's manual. a. Vehicle must remain OFF and undisturbed for two minutes to power down all control modules.  | |||||||||
| 5. | Put vehicle in Accessory mode. See owner's manual. | |||||||||
| 6. | See Figure 3.IFCU should automatically reconnect to Wi-Fi, a Navigation enabled pop-up window will be displayed. a. Select: OK (2). This will acknowledge and confirm activation of navigation.  | 
 Figure 3. Navigation Enabled  | ||||||||
| 7. | See Figure 1. Select: Navigation icon (1). | |||||||||
| 8. | See Figure 4. Navigation screen should be displayed. | 
 Figure 4. Navigation Screen  | ||||||||
| 9. | See owner's manual for Navigation operation. |