HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE - STAGE I, II, III FAIRING LOWER SPEAKERS
941006232026-01-13
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
76001453, 76001454, 76001455 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Stage I, II, III Speaker Kits-Fairing Lowers
Table 2. Kit Contents: Stage I, II, III Speaker Kits-Fairing Lowers
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Grille assembly, left, Stage I Speaker | 76001508 | |
| Grille assembly, left, Stage II Speaker | 76001441 | |||
| Grille assembly, left, Stage III Speaker | 76001461 | |||
| 2 | 1 | Stage I speaker, left, 6.5 inch | 76001010 | |
| Stage II speaker, left, 6.5 inch | 76000999 | |||
| Stage III speaker, left, 6.5 inch | 76001466 | |||
| 3 | 1 | Stage I speaker, right, 6.5 inch | 76000998 | |
| Stage II speaker, right, 6.5 inch | 76001011 | |||
| Stage III speaker, right, 6.5 inch | 76001467 | |||
| 4 | 1 | Grille assembly, right, Stage I Speaker | 76001458 | |
| Grille assembly, right, Stage II Speaker | 76001440 | |||
| Grille assembly, right, Stage III Speaker | 76001460 | |||
GENERAL
Instruction sheet is also available electronically. To verify you are using the most current version available, do one of the following:
- Go to h-d.com/isheets
- Scan QR code in upper left corner of the instruction sheet
NOTE
This instruction sheet may have a Supplemental Video to assist installer in clarifying a certain part of the assembly. A linked video would be located at the end of this instruction sheet.
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
Proper installation of this kit requires the following parts available from a Harley-Davidson dealer:
2026 FLHXL, FLTRXL and FLHLT:
- Separate purchase and prior installation of Fairing Lower Speaker Installation Kit (Part No. 76001392).
- Separate purchase and prior installation of Secondary Amplifier Kit (Part No. 76001444).
- Separate purchase and prior installation of Amplifier Kit (Part No. 76001294).
- Separate purchase and prior installation of Left Saddlebag Amplifier Installation Kit (Part No. 76001385).
2025 FLHXU:
- Separate purchase and prior installation of Fairing Lower Speaker Installation Kit (Part No. 76001392).
- Separate purchase and prior installation of Amplifier Kit (Part No. 76001294).
2024 and later FLHX and FLTRX:
- Separate purchase and prior installation of Fairing Lower Speaker Installation Kit (Part No. 76001392).
- Separate purchase and prior installation of Amplifier Kit (Part No. 76001294).
- Separate purchase and prior installation of Color Matched Fairing Lower Kit.
- Separate purchase and prior installation of Engine Guard Kit (Part No. 49000284 or 49000285).
2024 FLTRX:
- Separate purchase and prior installation of Road Glide Fairing Support Kit (Part No. 47201044 or 47201045).
2023 and later FLHXSE and FLTRXSE:
- Separate purchase and prior installation of Fairing Lower Speaker Installation Kit (Part No. 76001392).
- Separate purchase and prior installation of Secondary Amplifier Kit (Part No. 76001444).
- Separate purchase and prior installation of Left Saddlebag Amplifier Installation Kit (Part No. 76001385).
- Separate purchase and prior installation of Color Matched Fairing Lower Kit.
- Separate purchase and prior installation of Engine Guard Kit (Part No. 49000284 or 49000285).
2023 FLTRXSE:
- Separate purchase and prior installation of Road Glide Fairing Support Kit (Part No. 47201044 or 47201045).
Installation by a technician at a Harley-Davidson dealership is recommended.
To ensure proper audio performance, speaker set up in the Infotainment Control Unit (IFCU) OR Digital Technician II (DT II) is required for audio configuration and amplifier firmware update.
NOTE
Make certain to select the proper stage speaker during set up for proper audio functionality and speaker performance. If the wrong stage is selected, this may lead to poor speaker performance and damage.
PREPARE
NOTE
Models with security: Disable security system. See Owner's Manual.
| 1. | Remove left saddlebag. See Owner's Manual. | |
| 2. | Remove left side cover. See Owner's Manual. | |
| 3. | Remove main fuse. See Owner's Manual. |
INSTALL
| 1. | See Figure 2. Orient fairing lower stage I (1, 2) or stage II/III (3, 4) speaker as shown. | |
| 2. | Install new speaker. a. See Figure 4. Connect connectors to speaker terminals. NOTE Use care to install wide spade connector (black) onto wide speaker terminal (-) and narrow spade connector (white) onto narrow speaker terminal (+) to ensure correct polarity. b. See Figure 5. Install speaker into enclosure aligning single enclosure post (1) with single speaker blind hole (3) and double enclosure pins (2) with double speaker holes (4). NOTE Double pins (2) will poke thru gasket on rear of speaker and into double holes (4) in speaker frame. c. Verify proper speaker alignment as stated in step 1 above. | |
| 3. | Install speaker screws. a. Alternately secure screws in a criss-cross pattern. b. Tighten. Torque: 1.8–2.3 N·m (16–20 in-lbs) | |
| 4. | Install grille. a. See Figure 3. Align posts on fairing lower speaker grille (1) with grommets(2). b. Install grille firmly into grommets until fully seated. |
| 1 | Left Stage I speaker |
| 2 | Right Stage I speaker |
| 3 | Left Stage II or III speaker |
| 4 | Right Stage II or III speaker |
Figure 2. Fairing Lower Speaker Orientation
| 1 | Fairing Lower Speaker Grille |
| 2 | Grommet (3) |
Figure 3. Fairing Lower Speaker Grille Install
| 1 | Positive speaker terminal (narrow) |
| 2 | Positive harness connector (white) |
| 3 | Negative harness connector (black) |
| 4 | Negative speaker terminal (wide) |
Figure 4. Fairing Lower Speaker Wiring
| 1 | Single enclosure alignment post |
| 2 | Double enclosure alignment pins |
| 3 | Single speaker blind hole |
| 4 | Double speaker holes |
Figure 5. Speaker Locating Features
COMPLETE
NOTE
To prevent possible damage to sound system, verify that ignition is OFF before installing main fuse.
| 1. | Install main fuse. See Owner's Manual. | |
| 2. | Install left side cover. See Owner's Manual. | |
| 3. | Install left saddlebag. See Owner's Manual. | |
| 4. | Turn ignition ON, but do not start vehicle. | |
| 5. | Make sure that all speakers are working properly. Check that upper fairing and lower fairing fader function is operating correctly. If not, check speaker wiring and proper speaker set up in the IFCU. |