Large Brake Pedal Kit
J063482016-03-25
GENERAL
Kit Number
50600179, 50600185, 50600186
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
  1. See Figure 1. Remove and discard the previously installed brake pedal cover from the foot brake lever.
  2. Align the pad assembly over the foot brake pedal (3) as shown. Assemble the plain washer (4) and screw (5).
  3. Thread the screw through the hole in the brake lever and into the back of the pad.
  4. Tighten the screw to 10 ft-lbs (13.56 Nm).
Figure 1. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Pad
Not sold separately
2
Pad housing
Not sold separately
3
Brake pedal original equipment
4
Washer
6333
5
Button head capscrew
4278