Oil Cooler Cover
J062742017-01-16
GENERAL
Kit Number
25700633, 25700634
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
REMOVAL
1.
See Figure 1. Remove oil cooler cover (1).
a.
Pull lower part of cover out and away from motorcycle.
b.
Detach upper portion of cover from motorcycle.
2.
Detach wire clips (2) from bracket.
3.
Remove screws (3). Discard.
1Oil cooler cover
2Wire clip (2)
3Screw (2)
Figure 1.
INSTALLATION
1.
See Figure 2. Install lower bracket (6) with new lower bracket mounting screws (4).
Torque: 27.1–29.8 N·m (20–22 ft-lbs)
2.
Install oil cooler cover (2) so that tab (3) of cover fits behind regulator (1).
3.
Install oil cooler cover mounting screws (5) through cover and into lower bracket (6).
Torque: 13.6–14 N·m (120–124 in-lbs)
1Regulator
2Oil cooler cover
3Tab
4Lower bracket mounting screw (2)
5Oil cooler cover mounting screw (4)
6Lower bracket
Figure 2.
SERVICE PARTS
Table 1. Service Parts Table
Description (Quantity)
Part Number
Oil cooler cover
Not Sold Separately
Socket head screw (2)
3228
Button head screw (4)
4365
Lower bracket
Not Sold Separately