SMALL BRAKE PEDAL PAD KIT
J063662016-05-17
GENERAL
Kit Numbers
50600182, 50600187, 50600188
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
See Figure 1. Remove the currently installed brake pedal pad from the vehicle foot brake lever. Discard the pad and attaching hardware.
2.
Align the new brake pedal pad (1) with the recess in the trim cover (2).
3.
Insert the threaded stud through the holes in the trim cover and vehicle foot brake lever.
4.
Install the plain washer (3) onto the threaded stud. Thread the 1/4-20 hex locknut (4) onto the stud. Tighten the nut to 13.6 N·m (10 ft-lbs).
SERVICE PARTS
Figure 1. Service Parts, Small Brake Pedal Pad Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Pad, brake pedal
Not sold separately
2
Trim cover, brake pedal
Not sold separately
3
Washer
6703
4
Hex locknut, 1/4-20
7686