HEEL/TOE SHIFT LEVER KITS
J064032017-09-26
GENERAL
Kit Number
Heel/Toe Shift Lever Kits:
33600164, 33600165, 33600166, 33600224
Toe Shift Lever Only Kits:
33600167, 33600168, 33600169
Heel Shift Lever Only Kit:
33600224
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Heel and toe shift pegs may be required for proper installation. Refer to the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only)
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
REMOVAL OF STOCK GEAR SHIFT LEVER
Remove Stock Gear Shift Lever (for heel shifter ONLY)
The gear shift lever supplied in the heel/toe and heel shift only kits is supplied due to the stock gear shift lever splined shaft only accommodating one shift lever. Refer to the service manual for proper removal of the stock gear shift lever, and the installation of the gear shift lever provided in your kit.
Take note of the angle at which the toe shifter is installed. This will provide a baseline for installing the new toe shifter.
Heel/Toe Shifter Kits
1.
Ensure proper gear shift lever (1) is installed.
2.
See Figure 1. Install the toe shift lever (2) onto the splined shaft, ensuring the angle of the lever is the same as the stock toe shift lever removed earlier.
3.
33600164, 33600165 and 33600166: Once the toe shift lever is assembled in the proper orientation, install a socket head cap screw. Tighten to value shown in service manual.
4.
Install the heel shift lever (3) for kits 33600164, 33600165, 33600166.
5.
33600164, 33600165 and 33600166: Once the heel shift lever is assembled in the proper orientation, install a socket head cap screw. Tighten to value shown in service manual.
Toe Shifter Kits
1.
See Figure 2. Install the toe shift lever (1) onto the splined shaft, ensuring the angle of the lever is the same as the stock toe shift lever removed earlier.
2.
Once the toe shift lever is assembled in the proper orientation, install a socket head cap screw (2), and tighten to the value listed in the service manual.
Heel Shifter Kits
1.
1. Ensure proper gear shift lever (1) is installed.
2.
2. See Figure 3. Install the toe shift lever (2) onto the splined shaft, ensuring the angle of the lever is the same as it was when removed earlier.
3.
3. Once the toe shift lever is assembled in the proper orientation, install a socket head cap screw (2), and tighten to the value listed in the service manual.
4.
4. Install the heel shift lever (3) for kit 33600224.
5.
5. Once the heel shift lever is assembled in the proper orientation, install the hex socket head cap screw and lock onto the lever. Tighten to value shown in the service manual for the toe shifter.
SERVICE PARTS
Figure 1. Heel/Toe Shift Kit
Figure 2. Toe Shift Kit
Figure 3. Heel Shift Kit
Table 1. Service Parts Table
Kit
Item
Description (Quantity)
Part Number
Kit 33600164
1
Gear shift lever (1)
Not sold separately
2
Shift lever, Toe, Billet style (chrome) (1)
Not sold separately
3
Shift lever, Heel, Billet style (chrome) (1)
Not sold separately
4
Socket head cap screw (2)
94332-91T
Kit 33600165
1
Gear shift lever (1)
Not sold separately
2
Shift lever, Toe, Billet style (black) (1)
Not sold separately
3
Shift lever, Heel, Billet style (black) (1)
Not sold separately
4
Socket head cap screw (2)
94332-91T
Kit 33600166
1
Gear shift lever (1)
Not sold separately
2
Shift lever, Toe, Billet style (edge cut) (1)
Not sold separately
3
Shift lever, Heel, Billet style (edge cut) (1)
Not sold separately
4
Socket head cap screw (2)
94332-91T
Kit 33600167
1
Shift lever, Toe, Billet style (chrome) (1)
Not sold separately
2
Socket head cap screw (1)
94332-91T
Kit 33600168
1
Shift lever, Toe, Billet style (black) (1)
Not sold separately
2
Socket head cap screw (1)
94332-91T
Kit 33600169
1
Shift lever, Toe, Billet style (edge cut) (1)
Not sold separately
2
Socket head cap screw (1)
94332-91T
Kit 33600224
1
Gear shift lever (1)
Not sold separately
2
Shift lever, Heel (1)
Not sold separately
3
Socket head cap screw (1)
10200350
4
Lock Nut
7686