7-INCH HEADLAMP TRIM RING
J061812017-08-23
GENERAL
Kit Number
61400319, 61400347, 61400348, 61400349
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no service parts available for this kit.
INSTALLATION
1.
Remove original equipment (OE) trim ring and mounting screw.
2.
See Figure 1. Slip new trim ring (2) over OE headlamp housing.
3.
Align the back mounting tab to the 11 o'clock position. Rotate the ring to the 12 o'clock position. Verify that the tab has engaged the headlamp mount ring.
4.
Position mounting screw (1) to lower mounting tab. Reuse OE screw.
5.
Tighten mounting screw to:
Torque: 1–1.5 N·m (9–13 in-lbs) Accessory Trim Ring Screw
1OE mounting screw
2Trim ring
Figure 1. Trim Ring