REAR SPEAKER TRIM KIT
J063032017-08-23
GENERAL
Kit Number
76000676, 76000677, 76000678
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1. This kit contains two rear speaker grille assemblies. There are no service parts available for this kit.
INSTALLATION
1.
Remove a speaker grille from the kit.
2.
Remove the four currently installed screws from the left speaker grille. Retain the screws.
3.
Remove original speaker grille and replace with speaker grille from kit.
4.
Secure the new grille with four screws retained from step two. Tighten the screws to:
Torque: 0.8–1 N·m (7–9 in-lbs) screw
5.
Repeat steps for the right side.
Figure 1. Rear Speaker Trim Kit