Chrome Mid Control Bracket Kit
J064412017-08-22
GENERAL
Kit Number
50500691
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
This kit requires thread lock for proper installation. LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97)
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for this year/model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
Kit Contents
See Figure 1 and Table 1.
REMOVE AND INSTALL
1.
This kit installs in the same manner as the original equipment (OE) control brackets. See the service manual to remove and install the control brackets.
DISASSEMBLE
1.
Disassemble control bracket. See the service manual.
ASSEMBLE
1.
Assemble control bracket. See the service manual.
SERVICE PARTS
Figure 1. Service Parts: Chrome Mid Control Bracket Kit
Table 1. Service Parts: Chrome Mid Control Bracket Kit
Item
Description (Quantity)
Part Number
1
Right footpeg bracket
50500995
2
Left footpeg bracket
50500994
3
Screw (4)
10200536